Print 
Email 
BAC-4003CW0001 | KMC Controls | Thermostats & Controllers
AppStat: FCU, 3-Speed or Mod Fan, On/Off or Mod Valves, W/O Humidity Sensor or Motion Sensor
Brand:KMC Controls
MPN:BAC-4003CW0001
SKU:BAC-4003CW0001
List Price:
$1,336.00
Today's Price:
$694.72
product specifications
Supply Voltage
24 VAC
Type
Communicating
Display
Full Color
Controls Outputs
Relay or Analog
product series specifications
- Specifications and design subject to change without notice.:
- Screen:
- :
- Type Active color LCD with LED back lighting, 128 x 128 pixels
- :
- Dimensions 1.00‚Ä= x 1.04‚Ä= (25 x 26 mm)
- Case Material:
- White flame-retardant plastic
- Mounting Backplate mounts to a standard 2‚Ä= x 4‚Ä= vertical handy-box or Euro style box. The controller is secured to the backplate with a concealed Allen screw.:
- Environmental Limits:
- :
- Operating 32° to 140‚Ñâ (0° to 49‚ÑÉ)
- :
- Shipping -40° to 160‚Ñâ (-40° to 71‚ÑÉ)
- :
- Humidity 0 to 95% RH non-condensing
- Supply Voltage:
- 24 VAC (–15%, +20%), 50-60 Hz, 12 VA, Class 2 only, non-supervised (all circuits, including supply voltage, are power limited circuits)
- Inputs and Outputs:
- All inputs and outputs for the AppStat are set up at the factory and do not require set up in the field.
- Inputs:
- Analog inputs for discharge air temperature, water supply temperature, outside air temperature, fan status, and remote temperature sensor
- :
- Sensors are automatically detected
- :
- Inputs accept industry-standard 10K ohm Type II for space, 10K ohm Type III for duct
- :
- Input overvoltage protection up to 24 volts AC, continuous
- :
- 12-bit analog-to-digital conversion
- Relay Outputs:
- All relay outputs are normally open, SPST, Form “A” relays
- :
- 1 Ampere maximum per relay at 24 volts AC or DC for each output. Maximum for all relay outputs is 3 amperes (72VA)
- Analog Outputs:
- Short-circuit protected
- :
- Loads up to 10 mA at 0–12 VDC
- :
- 8-bit PWM digital-to-analog conversion
- Connections:
- Screw terminal blocks, wire size 14–22 AWG, for inputs, outputs, power, and network connections.
- BACnet communication:
- Integral peer-to-peer BACnet MS/TP network communications.
- :
- Network speed from 9600 to 76,800 baud
- :
- Automatic baud detection.
- :
- Screw terminal block mounted to backplate. Wire size 14–22 AWG
- :
- Front panel selection for device instance, MAC address, and baud rate
- :
- Meets or exceeds ANSI/ASHRAE BACnet Standard 135-2008 for Application Specific Controllers.
- Accuracy–Temperature Only Models:
- :
- Type Thermistor
- :
- Accuracy ±0.36‚Ñâ (±0.2‚ÑÉ)
- :
- Resistance 10,000 Ω at 77℉ (25℃)
- :
- Operating Range 48° to 96‚Ñâ (8.8° to 35.5‚ÑÉ)
- Accuracy–Temperature and Humidity Models:
- Temperature Sensor:
- :
- Type CMOS; 10K Type II Space, 10K Type III Duct
- :
- Accuracy ±0.9‚Ñâ offset (±0.5‚ÑÉ) from 40° to 104‚Ñâ (4.4° to 40‚ÑÉ)
- :
- Resolution ±0.1‚Ñâ (±0.1‚ÑÉ)
- :
- Operating Range 36° to 120‚Ñâ (2.2° to 48.8‚ÑÉ)
- :
- Response time 5 to 30 seconds
- :
- Remote 10KΩ Type II for Space, 10KΩ Type III for Duct
- Humidity Sensor:
- :
- Type CMOS
- :
- Humidity 0 to 100% RH
- :
- Accuracy @ 25‚ÑÉ ± 2% RH (10 to 90% RH)
- :
- Response Time 4 seconds or less
- Regulatory approvals:
- UL 916 Energy Management Equipment, File #E145832
- :
- FCC Class A, Part 15, Subpart B and complies with Canadian ICES-003 Class B
- :
- BACnet Testing Laboratory listed
- :
- SASO PCP Registration KSA R-103260
- Motion Sensor:
- :
- Detector Type Passive infrared
- :
- Range 33' (10 m)
- Dimensions:
- 5.12‚Ä=H x 3.50‚Ä=W x 1.13‚Ä=D (130 x 89 x 29 mm)
- Weight :
- 0.38 lb (0.17 Kg)
- Warranty:
- 5 years
product series features
- Stand alone operation if needed
- Two piece design for easy installation
- Fahrenheit or Celsius
- Bright, full color display
- Built-in temperature, humidity, and motion sensors (dependent on model)
- Factory supplied programs for multiple applications
- Network ready for BACnet MS/TP
more information & related documents
Series Description
The KMC AppStat combines the power of a space-mounted equipment controller with the convenience of built-in temperature, humidity and motion sensors. The controllers include a wide range of factory supplied programs for two and four pipe fan coil units, roof top units, heat pump units, and packaged or split unitary systems. Stand alone operation means no special programming, software applications, or setup tools are required to configure and commission an AppStat. All options can be set by using only the five front panel buttons and the easy-to-read menus in the full color display. The attractive two-piece design is ideal for new installations or upgrades of older, less efficient thermostats. AppStat installation requires only mounting the backplate to a wall or electrical box, connecting wires to screw terminals, and plugging the AppStat into the backplate. The full color display is easy to read across a room even in bright sunlight. All models are native BACnet, Application Specific Controllers ready to connect to a BACnet MS/TP network.
Kele Description
APPSTAT/ FCU/3-SPEED OR MOD FAN/ON/OFF OR MOD
Manufacturer
KMC Controls
Related Documents
KMC Cross Reference 
