VRN2BGPA3000 | Honeywell | Control Valves
VRN2B005.00PA+MVN713A0000--3/4in 2-way 5GPM Brass Trim+Modulating Fail in Place 24 VAC
Brand:Honeywell
MPN:VRN2BGPA3000
SKU:VRN2BGPA3000
List Price:
$1,082.00
Today's Price:
$562.64
product specifications
Connection
NPT
Supply Voltage
24 VAC
Type
Assembly
Pattern
2-Way
Trim Material
Stainless Steel
Size
3/4 in
Control Signal
Modulating
GPM
5 GPM
product series specifications
- Valve Type:
- Dynamic Pressure Regulated Control Valve
- Body Style:
- Two-way ball valve, straight-through flow, full port with patented flow control insert
- Pipe Size:
- 1/2‚Ä= to 3‚Ä= with female NPT pipe fittings
- Body Pressure Rating (maximum):
- 360 psi (2500 kPa) at 250‚Ñâ (121‚ÑÉ)
- Controlled Medium:
- Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
- Medium Temperature Range:
- -22° to 250‚Ñâ (-30° to 121‚ÑÉ)
- Maximum Differential Pressure:
- 1 gpm (1/2‚Ä= valve) to 95 gpm (3‚Ä= valve)
- Close-off pressure:
- 100 psid
- Flow Characteristics:
- Equal percentage with flow control insert
- Body:
- Forged brass (ASTM B283)
- Flow Optimizer:
- Laser-milled, glass-reinforced NorylÆ
- Trim (ball and stem):
- Nickel-chrome plated brass, or stainless steel
- Stem Seals:
- EPDM O-ring and Teflon‚Ñ¢ bearings
- Ball Seals:
- Reinforced Teflon‚Ñ¢ seals, with EPDM O-rings
- Regulator:
- Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
- Compatible Actuators:
- :
- Non-Spring Return ML6161, ML7161, MN6105*, MN7505*
- :
- Spring Return MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2‚Ä= or 3/4‚Ä= (DN15 ~ DN 20)
- :
- Minimum Torque Required
- :
- 35 lb-in (4 Nm) up to 3‚Ä= (‚â§DN80)
- :
- 18 lb-in (2 Nm) up to 3/4‚Ä= (and 1‚Ä= up to 9 gpm)
- Warranty:
- 1 year on valves, 5 years on actuators
- :
- * These actuators available factory-installed.:
product series features
- Sizes from 1/2 to 3 in. with internal (female) NPT connections
- Controls hot or chilled water with up to 50% glycol
- Regulated flow rates available from 1 to 95 gpm
- Differential pressure regulator for constant pressure drop across valve seat
- Positive pressure, rolling diaphragm regulator design for flow control accuracy of ±5%
- Equal percentage flow characteristic using patented flow control ball insert
- Multiple maximum flow rates available per valve size
- Patented ball seals for low operating torque
- Nickel-chrome plated brass or stainless steel trim
- Choice of factory-installed actuation using Honeywell N05/S05-series direct coupled actuators: Floating, Modulating (2-10 V), Spring Return Modulating/Floating
- Spring return actuators field-configurable for normally open or normally closed fail-safe position
- Removable, manual operating handle to control valve during installation or in an event of power failure
- Upstream Test Port for venting or pressure gauge attachment
- Three actuator orientations on the valve for cramped spaces
- Integral snubber eliminates affect of system pressure fluctuations and entrapped air while improving flow performance
more information & related documents
Series Description
The Honeywell VRN Series pressure-regulated control valves reduce overall installation labor by integrating flow control and temperature control functions into a single valve assembly and then automatically controlling the flow in each hydronic system circuit to maintain temperature when piping pressures fluctuate. The valves feature an integrated pressure control cartridge that delivers flow balancing and control functions in one package. Calculating Cv is not required, simply match the circuit flow rate with the valve capacity to determine the correct model number. VRN valves are threaded, sizes 1/2 in. to 3 in. FNPT, and use standard Honeywell 44 in-lb fail-safe and non-fail safe direct-coupled actuators.
Kele Description
PICV/3/4IN/2W/5GPM/STANDARD-MOD(FAIL IN PLACE)/24V
Manufacturer
Honeywell