TB-S | Kele | Temperature Sensors & Transmitters

SETPOINT OPTION FOR FLUSH SENSOR (ST-S*) Two-wire with resistance from 0 Ohm to 10,000 Ohm (0 Ohm to 1500 Ohm optional XA1500), flush enclosure with pigtails for the connection GREENFIELD FITTING (factory installed) Option available with ST-D sensor SETPOINT OPTION FOR EXECUTIVE SENSOR (ST-S*E) Two-wire with resistance from 10,000 Ohm to 30,000 Ohm, (1000 Ohm to 3000 Ohm, opt. XA10K),(1000 Ohm to 1400 Ohm, opt. XA2K) HANDY-BOX HOUSING (factory installed) Equipped with eleven 1/2 in knockouts, option available with ST-A, ST-D, and ST-W sensors SETPOINT OPTION FOR SPACE SENSOR (ST-S*P) Two-wire with resistance from 0 Ohm to 10,000 Ohm (0 Ohm to 1500 Ohm optional XA1500), space enclosure with pigtails for the connection PLASTIC EUROPEAN-TYPE HANDY BOX Complete with four 3/4 in cutouts, two open cable cutouts and snap-on cover, option available on all ST-A, ST-W, and ST-D sensors 1/2 in STANDARD SERVICE CONDUIT (LB) FITTING Available for the ST-A all-purpose and ST-W immersion sensors 1/2 in SEALTITE STRAIGHT FITTING Used for liquid-tight connection, available for the ST-W immersion sensors CUSTOM LOGO Any logo or wording added to the space or executive enclosure, minimum order and customer artwork required SECURITY SCREWS For use with ST-S* sensors, see SD-6 spanner screwdriver MOMENTARY PUSH BUTTON Wired N.O. with pigtails, N.C. available upon request for flush and executive enclosures ANALOG BIMETAL THERMOMETER Measures 50 degrees to 90 degrees F for ST-S*E sensors XTA Measures 13 degrees to 29 degrees C for ST-S*E sensors XTAC MOMENTARY MEMBRANE PUSH BUTTON Wired N.O. with pigtails or to terminals when used with options requiring circuit cards, available with executive room enclosures only DIGITAL THERMOMETER OPTION 3-1/2 digit display readout from 15 degrees to 32 degreesC with one-year battery, 3/8 in high, display updates every 10 seconds RED LED INDICATOR LAMP Powered externally with 24 VAC/VDC and connected via a terminal block CLM-20 Limits the output of any 4-20 mA transmitter to a factory set 20 mA, wired in series, and adds 125 Ohm of effective load to the transmitter

STAINLESS STEEL BUTTON SENSOR HOUSING - NO SENSOR

Kele