BA/BP2 | BAPI | Temperature Sensors & Transmitters
BP2 BACK PLANE 2 POSITION
Brand:BAPI
MPN:BA/BP2
SKU:BA/BP2
List Price:
$49.21
Today's Price:
$25.59
product specifications
Type
Accessory
product series specifications
- Device Operation:
- Supply Voltage:
- Most modules powered from BA/RCV receiver
- VOM, ROM:
- Powered from reciever bus
- RYOx, SOM:
- Powered from reciever bus
- COM:
- 9-36 VDC from current loop
- Output:
- RS485 bus to a maximum of 127 ‚Ä=Output Modules‚Ä=
- BA/VOM-xx:
- 0-5V or 0-10V @10KO
- BA/COM-xx:
- 4-20mA, 750O @24VDC
- BA/SOM-xx:
- 0-5V or 0-10V @10KO, or Resistance 0-75K
- BA/ROM-xxx:
- Thermistor (10K-2, 10K-3, 20K)
- BA/RYOM:
- Momentary, Triac, 40V AC/DC, 150mA, 1µA leakage
- BA/RYOL:
- Latching, Triac, 40V AC/DC, 150mA, 1µA leakage
- Indication:
- LED blinks on each reception
- A/D resolution:
- 10 bit, 1024 counts‚Ä=
- Mounting:
- DIN rail or 2 screws to back plane
- :
- Output modules plug into the right side of receiver
- and/or other output modules :
- Wiring:
- 2 field terminals, 22-16 AWG
- :
- RS485 Comm. trunk 6 terminals or plug
- Operating Temperature:
- 32 to 140‚Ñâ (0 to 60‚ÑÉ)
- Operating Humidity:
- 5-95% RH non-condensing
- Construction:
- ABS Plastic, UL94V-0
- Enclosure Rating:
- Indoor, NEMA 1
- Dimensions:
- 2.75‚Ä=H x 2.34‚Ä=W x 1.2‚Ä=D, (7.0 x 5.9 x 3.0 cm)
- Weight:
- 0.3 lb (0.14 Kg)
- Warranty:
- 2 year
- Radio/Radio Receiver Interface:
- Update Interval:
- Updates on each reception
- Lost Comm. Fail Safe:
- If no reception >15 minutes modules fail safe
- BA/VOM-xx:
- ‚Ñâ Fails low and %RH Fails high
- BA/COM-xx:
- ‚Ñâ Fails low and %RH Fails high
- BA/SOM-xx:
- ‚Ñâ Fails low
- BA/ROM-xx:
- ‚Ñâ Fails low
- BA/RYOM :
- Fails to the normal condition per order (NO or NC)
- BA/RYOL:
- Fails to the normal condition per order (NO or NC)
- Programming:
- Push button on ‚Ä=Transmitter/Output Module‚Ä= simultaneously
- Approvals:
- RoHS
product series features
- Provide BAS point wiring
- 127 modules per system
- Thermistor simulation for temperature
- 0-10 VDC, 0-5 VDC, or 4-20 mA signals
- Solid-state contacts
- Built-in fail-safe on signal loss
- Snap-track and DIN rail mounting
more information & related documents
Series Description
The BAPI BA/ROM, VOM, COM, and RYOM wireless system output modules are specifically designed to connect to any BA/RCV receiver and communicate over an RS485 communication trunk to generate standard output signals for any BAS system. A total of 127 modules may be interspersed on the RS485 trunk. Each will output a signal representative of its assigned remotely located wireless transmitter. Each module may be powered from the receiver power bus, or individually, based on overall system power requirements. The BAPI BA/ROM thermistor simulation output module converts a wireless transmitter temperature signal according to a standard thermistor curve. The three standard curves are 10 K Ohm Type 3, a 10 K Ohm Type 2, with a resistance temperature response of 35 degrees to 120 degrees F (1 degrees to 50 degrees C) and a 20 K thermister curve with response of 50 degrees to 120 degrees F (12 degrees to 50 degrees C). The BAPI BA/VOM voltage output module converts a wireless transmitter temperature signal to a standard voltage signal. The two standard voltage outputs are 0-5 VDC and 0-10 VDC, with voltage temperature responses based on individual models. The BAPI BA/COM current output module converts a wireless transmitter temperature signal to a standard 4-20 mA current signal. The 4-20 mA current is typical of a loop powered (9-36 VDC) device with current temperature responses based on individual models. The BAPI BA/RYOM digital output module converts the pushbutton on a wireless room temperature transmitter to a solid-state relay momentary closure for AC or DC voltages (5 second momentary actuation). NO or NC solid-state contacts are available, based on individual models. The BAPI BA/RYOL digital output module converts the BA/WDI digital input transmitter signal to a latching relay output. NO or NC fail safe contacts are available, based on individual models. The BAPI BA/SOM setpoint output module converts the setpoint data received to a resistance or voltage output.
Kele Description
BP2 BACK PLANE 2 POSITION
Manufacturer
BAPI
Related Documents