2003 | Dwyer Instruments | Pressure Components

Supply Voltage (If Used): Not Required

Readout (Analog, digital etc.): Red tip needle w/ white back ground

Dial (white, mirrored, LCD, LED, Stop pins Etc.): 4½ half dial w/ graduations per order

Window Material, (Glass, Polycarbonate etc.): Clear acrylic plastic

Indication Scale: Selectable by order (in WC)

Accuracy: ± 2% of Full scale @70°F

(-0) ± 3% of Full scale

(-00) ± 4% of Full scale

Calibration (adjustable, Fixed, Etc.): Manual zero adjust by center screw

Sensor principle (Balanced, Bourdon tube, Capacitive): Silicone diaphragm

Operating Pressure Ranges: -1 in WC to 10 in WC

Overpressure (Burst): -20 in Hg to 15 psig (-67.75 to 103.45 kPa)

Max Operating Pressure (Proof): -20 in Hg to 15 psig (-67.75 to 103.45 kPa)

Operating Temperature: 20°F to 140°F (-7°C to 60°C)

Operating Humidity: 0 to 95% Non-condensing

Wetted Parts: Silicone, aluminum, acrylic, polycarbonate and steel

Media Compatibility: Inert Dry Air

Process Connection: Two 1/8 in FNPT (H/L), (Back and Side ports)

Connection Accessories: Two 1/8 in FNPT barbed fittings & plugs (included)

Mounting: Vertically, Three flush mounting tabs (included)

Wiring Terminations: (if needed) None required

Enclosure Case Rating: Aluminum housing w/Clear Acrylic face

Enclosure Rating: NEMA 1

Dimensions: 4.75 diameter (4.5 in hole) x 1.69 in D (12.6 (11.43) x 4.29cm)

Weight: 1.2lb. (0.51kg)

Approvals: RoHS

Warranty: 1 Year