Print Print
Home|Products|Lighting Controls|HDR|HDR-11
HDR

HDR-11 | Watt Stopper Legrand | Lighting Controls

Low Voltage Relay (5 Wire) With Override & Connector

Brand:Watt Stopper Legrand

MPN:HDR-11

SKU:HDR

List Price:

$245.00

Today's Price:

$127.40



Availability: 5 In Stock
Available Inventory
These numbers are estimates based on our Memphis location and subject to change without notice based on customer demand.

Need more?
Just order your desired quantity and we'll ship the available inventory immediately while we source the remaining quantity to get you all the products you need as soon as possible.

We can also reserve the available inventory and ship once we acquire the remaining quantity from the supplier. Just choose "Ship Complete" at checkout.

product datasheet

product specifications

Supply Voltage

24 VAC

Type

Relay

product series specifications

    Mounting

    :
  • Standard 1/2 knockout mounting

    Wire gauge

    :
  • Accepts wire gauge #10 - #14 AWG, copper wire, solid or stranded

    Operating voltage

    :
  • 24 VDC

    Pilot contacts

    :
  • Isolated pilot relay contacts, 0.5 Amp @ 30 VAC/DC for status feedback

    Ballast load

    :
  • 30 Amp @ 277 VAC (including HID) 20 Amp @ 347 VAC

    Tungsten load

    :
  • 20 Amp @ 120 VAC

    Resistive load

    :
  • 30 Amp @ 347 VAC

    Motor load

    :
  • 1-1/2 HP @ 120 VAC

    Short circuit

    :
  • Rated 14,000 amps Short Circuit Current Rating (SCCR)

    Dimensions

    :
  • 3.2" x 1.3" x 0.85" (81.3 x 33.0 x 21.6 cm)

    Approvals

    :
  • UL listed E258542, CSA certified

    Warranty

    :
  • 5 years

product series features

  • Integral manual override
  • Suitable for use with all HID ballasted loads
  • Expected service life is over 25 years at nominal load and cycle rate
  • Manual override switch
  • 5-pin pluggable connection

more information & related documents

Series Description

This low voltage relay is used for control of lighting circuits and other electrical loads. Momentary, low voltage pulses from the panels control system switch the relays on or off. Mechanical latching operation results in lower power consumption. The relay will remain in the last switched state in the event of a power loss. A manual override switch allows lights to be turned on in the event of a panel or relay failure. The relay mounts into a standard knockout and comes with a pluggable cable for easy panel connection. Direct replacement relay for Watt Stoppers Lighting Integrator control panels.

Kele Description

RELAY (5 WIRE) WITH OVERRIDE & CONNECTOR

Manufacturer

Watt Stopper Legrand

x