ELCU-200 | Watt Stopper Legrand | Lighting Controls
EMERGENCY UL924 BYPASS SHUNT RELAY
Brand:Watt Stopper Legrand
MPN:ELCU-200
SKU:ELCU-200
product specifications
Type
Relay
Supply Voltage (Nominal)
120 VAC
Mount
Snap-In
product series specifications
Supply Voltage: 120/277 VAC, 60 Hz, xx VA
Auto Voltage Detect
Power Output: 24 VDC for Emergency contact DI
Contact Type: SPST-N.C., Zero crossover switching
Contact Rating:
Ballast: 20A @ 120 VAC; 20A @ 277 VAC
Tungsten: 10A @ 120 VAC maximum load
Fan HP: 1HP @ 120 VAC maximum load
Status Contact: None
Manual Override: Push-to-test button on unit
Remote Activation:
DI" for Emergency activation (Test, Fire Alm, Sec Alm)
DI" for Norm/Emrgcy activation (Wall swch, Motion, Central light CTRL)
Coil Ratings:
Electrically held emergency contactor coil
Energize: Greater than 80% of supply voltage (per order)
Drop-out: Less than 80% of supply voltage (per order)
Cycle Endurance: 15M cycles
Visual Indication: 3-LEDs (Remote activation, Norm PWR, Emgcy PWR)
Short Circuit Current (SCCR): Not Specified
Operating Temperature: 32° to 131°F (0° to 55°C)
Operating Humidity: 5% to 95% RH noncondensing
Wiring Terminations: 6 pigtails 18 AWG and 2 pigtails 12 AWG
Mounting: Threaded Hub mount for 1/2" knockout
Enclosure Rating: NEMA 1, Fire rated V-0, 80°C
Dimensions: 1.7"H x 2.97"W x 1.64"D, (4.3 x 7.5 x 4.1 cm)
Weight: 0.44 lb (0.2 kg)
Approvals:cUL, UL 924 listed, file #E302768, UL 2043 plenum rated, Meets NFPA, OSHA, and NEC safety codes
Warranty: 5 years
product series features
- Eliminates energy waste caused by emergency lighting that is always on
- Integral push-to-test button activates emergency mode for a true test condition
- Connects to EMTS-100 Remote Test Switch or other input to activate emergency on from a remote location
- Operates as a control device or as a shunt
- Senses local single circuit power failure
- Zero cross switching technology for reliability and increased product life
- Compatible with WattStopper occupancy sensors, daylighting controls, lighting control panels, and dimmers
- LED indication for emergency and normal power
- Half-second delayed on positively identifies emergency fixtures for required maintenance
- Provides absolute fail-to-on emergency lighting
- Qualifies for use on ARRA-funded projects
more information & related documents
Series Description
The Wattstopper ELCU-200 emergency lighting control unit is a self-contained device that allows any standard lighting control device to control emergency lighting in conjunction with normal lighting in any area within a building. If power is lost for any reason, including the tripping of a single branch circuit breaker, the ELCU-200 will force on the emergency fixtures for that area. The ELCU-200 can be wired either as a control device, so that emergency lighting follows the control of normal lighting, or as a bypass device to shunt emergency power around a control device (e.g., a dimmer) when normal power fails.
Kele Description
EMERGENCY UL924 BYPASS SHUNT RELAY
Manufacturer
Watt Stopper Legrand
Related Documents
ELCU 200 Instructions 
