M9310-HGA-2 | Johnson Controls | Actuators & Dampers
ACT/90-INLB/24V/2POS-FLTG-PROP/NSR
Brand:Johnson Controls
MPN:M9310-HGA-2
SKU:M9310-HGA-2
List Price:
$575.00
Today's Price:
$299.00
Log in for customized pricingproduct specifications
Supply Va
6 VA
Torque
90 in-lb
Enclosure Rating
NEMA 5/IP54
Power Requirements
Nominal AC 120V at 60 Hz
Supply Voltage (Nominal)
24 VAC
Application
Building Automation System
Operating Temperature Range
-22 to 140 °F
Control Signal
Two Position,Floating,Analog
product series specifications
Ambient Operating Conditions: -22°F to 140°F (30°C to 60°C), 5 to 95% RH
Ambient Storage Conditions: -40°F to 185°F (-40°C to 85°C), 5 to 95% RH
Dimensions (H x W x D): 12.08 x 5.39 x 7.95 in. (307 x 137 x 202 mm)
Enclosure: NEMA 5/IP54
Shipping Weight: 2 lbs.
product series features
- Models with Automatic Signal Input Detection, On/Off, Floating, and Proportional Control with Adjustable Span and Offset. Increases availability at distributors and simplifies retrofits.
- Line Voltage On/Off and Floating Models. Reduces total installation cost by avoiding installation of external power supply adapters.
- High Speed On/Off and Floating Models. Allow applications in loops that require a quick response time.
- Easy Conversion to Valve Operation-Same Actuator Used for Dampers or Valves. Increases availability at distributors with only one actuator to learn.
- Optional Accessory Kit Increases availability at distributors. The auxiliary switch kit provides two line-voltage-capable single-pole, double-throw (SPDT) switches with continuously adjustable switch points, and the auxiliary potentiometer kit provides several potentiometer feedback options. Facilitates safety interfacing or signaling.
- Backward Compatible Auxiliary Switch Kits and Auxiliary Potentiometer. Allows for a seamless retrofit without the need to replace the controller.
- Self-Calibrating Input Signal to Adjust Stroke. Eliminates the need for a complex calibration procedure when adjusting stops.
- Direct-Coupled Design. Requires no crankarm or linkage.
- Electronic Stall Detection Protects from overload at all angles of rotation. The actuator may be stalled anywhere in its rotation range without the need for mechanical end switches.
- Microprocessor-Controlled Brushless DC Motor. Provides constant runtime independent of torque and increases lifecycle by reducing wear.
- Mode Configuration Switches Permits calibration, input signal range selection, and control logic reversal for proportional control.
- Integral Cables with Colored and Numbered Conductors. Simplify installation and field wiring.
- Optional Integral 1/2 in. (13 mm) Threaded Conduit Connectors. Simplify installation and field wiring.
- Plenum-Rated Models. Enable use in other environmental air spaces (plenums) in accordance with section 300.22(C) of the National Electric Code.
- Small Footprint. Allows application in smaller spaces than the M9100 Series Actuators.
- NEMA 5/IP54 Enclosure. Enhances the range of application environments.
- Underwriters Laboratories Inc.® (UL), CE Mark, and RCM Compliance. Provides internationally recognized regulatory agency approvals.
- Manufactured under International Standards Organization (ISO) 9001 Quality Control Standards. Ensures quality.
- Bottom-Mounted Coupler. Simplifies short shaft damper applications.
more information & related documents
Series Description
The Johnson Controls M9300 Electric Non-Spring Return Actuator Series provides control of dampers in HVAC systems. Actuators in this series provide rated torques from 70 lb-in. (8 Nm) to 310 lb-in. (35 Nm). The series consists of models for on/off and floating control as well as models with Automatic Signal Input Detection, which allow automatic recognition of input signals for on/off, floating, and proportional control. These actuators are configured for direct mounting and do not require damper linkage. Actuators can be mounted directly with a universal clamp to a round damper shaft from 3/8 in. (10 mm) up to 1-1/16 in. (27 mm), and to a square damper shaft from 3/8 in. (10 mm) up to 3/4 in. (19 mm).
Kele Description
ACT/90-INLB/ 24V/2POS-FLTG-PROP/NSR
Manufacturer
Johnson Controls
Related Documents
M9300 Datasheet 
