Power Monitoring and Protection

DTS DC Series



Product Bar End
Product Bar End

DTS DC Series

Measurlogic Power Meters and Transducers DTS DC Series

Measurlogic Power Meters and Transducers

 

The DTS DC Series has a very compact DIN rail design and requires no external power source to operate; also comes standard with color coded, pluggable connectivity. This meter can function in either a single, split or three phase environment and is equipped with auto-topology detection. The DTS DC provides Voltage, Current, Power and Energy measurements and works with DC Shunts and external Hall Effect current sensors. The DTS DC can handle a voltage input up to 1000Vdc. For easy configuration in-the-field, communications can be set via 8-way DIP switches when utilizing the Modbus RTU protocol. Or for remote configurability, all of our DTS Series of meters come with the free DTS Config software platform; where you can conveniently choose from over 200 parameters at the frequency you require. The DTS DC meter comes with a User-definable Modbus register area. Whether communicating via RS-485 or Ethernet, the DTS DC supports most accepted protocols, including Modbus RTU, Modbus TCP, BACnet MS/TP, BACnet/IP, SNMP, DNP 3.0 or LonWorks (model dependent). The DTS DC is available with optional digital status/counter inputs OR digital outputs. Also, if in the future, you decide to integrate renewable energy sources, the DTS DC will conveniently operate as a Bi-directional NET meter. The DTS DC is SunSpec Alliance certified and easily integrates with Building Automation Systems and Energy Monitoring Software. All the DTS series is designed and manufactured in the USA and complies with the Buy American Provisions of ARRA Section 1605.


Products

(Wholesale customers, log in for your special pricing)

Please call for product availability

Accessories

No accessories found
Features
  • DC power / energy sub-meter provides Voltage, Current, Power and Energy measurements
  • Bi-directional for renewable systems (NET metering)
  • Interfaces with shunt or external Hall Effect current sensors
  • Up to 800Vdc Voltage input
  • Embedded Ethernet connectivity – Modbus/TCP, BACnet/IP, SNMP or DNP 3.0
  • RS-485 connectivity – Modbus RTU or BACnet MS/TP
  • Communications setting via DIP switches for Modbus RTU protocol
  • LonWorks FT-10 communications
  • 2 digital status/counter inputs OR digital outputs – optional
  • Compact DIN rail design
  • User configurable using DTS Config software
  • User-definable Modbus register area
  • SunSpec Alliance certified
  • Designed and Manufactured in the USA. Complies with the Buy American Provisions of ARRA Section 1605