XEC-3001 Series

Product Bar End
Product Bar End

XEC-3001 Series

Electronic/Pneumatic Transducer XEC-3001 Series

Electronic/Pneumatic Transducer


The KMC Controls XEC-3001 Series Electronic/Pneumatic Transducer converts an analog voltage or current input signal into a linear pneumatic output signal of 3 to 15 psig for use in a variety of Building Automaton Systems, BAS. The pneumatic output provides accurate positioning of dampers and valve actuators used in HVAC systems. The IP300 electro pneumatic transducer features three selectable inputs of 1-5 volt DC, 2-10 volt DC, or 4-20 mA. The unit can be mounted in any orientation with the 3.25 snap track. The transducer is equipped with an internal filter and a gauge tap for pressure output indication.


(Wholesale customers, log in for your special pricing)

QtyModelDescriptionIn StockList PriceInternet Price
XEC-3001 E/P TRANSDUCER 3-15PSIINFO367.00205.52
XEC-3001-G I/P TRANSDUCER 4-20MA/3-15PSI W-GAGEINFO488.58273.60


No accessories found
  • Three user-selectable inputs
  • 24 VAC or VDC power supply
  • Gauge tap for pressure output indication
  • Zero and span adjustment
  • Snap track mounting

Supply Voltage:24 VAC/VDC

Supply VA:1 VA @ 24 VAC; 50 mA @ 24 VDC

Input:1-5 VDC, 2-10 VDC, or 4-20 mA

Input Impedance:100 kΩ @ 1-5 VDC; 200 kΩ @ 2-10 VDC; 250Ω @ 4-20 mA

Wiring Terminations:Screw terminals

Air Capacity:200 scim (55 mL/s)

Air Connections:3/16" diameter barbs for 1/4" OD tubing; 1/8" FNPT gauge port

Air Consumption:28.8 scim (7.9 mL/s) @ 20 psig (138 kPa) supply

Maximum Pressure:30 psig (207 kPa)

Nominal Pressure 20 psig (138 kPa):

Linearity:1% of full scale

Hysteresis:0.75% full scale

Output:3-15 psig (21-103 kPa)

Operating Temperature:40° to 120℉ (4° to 49℃)

Operating Humidity:10 to 90% RH (non-condensing)

Weight:0.3 lb (0.16 kg)

Meets ARRA or BAA:Yes

Warranty:1 year