Transducers

IP 300



Product Bar End
Product Bar End

IP 300

Electronic/Pneumatic Transducer IP 300

Electronic/Pneumatic Transducer

 

The KMC Controls IP300 electronic/pneumatic transducer converts an analog voltage or current input signal into a linear pneumatic output signal of 3 to 15 psig for use in a variety of building automaton systems, BAS. The pneumatic output provides accurate positioning of dampers and valve actuators used in HVAC systems. The IP300 electro pneumatic transducer features three selectable inputs of 1-5 volt DC, 2-10 volt DC, or 4-20 mA. The unit can be mounted in any orientation with the 3.25 snap track. The transducer is equipped with an internal filter and a gauge tap for pressure output indication.


Products
Filter:

(Wholesale customers, log in for your special pricing)

Please call for product availability

Accessories

No accessories found
Features
  • Three user-selectable inputs
  • 24 VAC or VDC power supply
  • Gauge tap for pressure output indication
  • Zero and span adjustment
  • Snap track mounting
Specifications

Supply Voltage:24 VAC/VDC

Supply VA:1 VA @ 24 VAC; 50 mA @ 24 VDC

Input:1-5 VDC, 2-10 VDC, or 4-20 mA

Input Impedance:100 kΩ @ 1-5 VDC; 200 kΩ @ 2-10 VDC; 250Ω @ 4-20 mA

Output:3-15 psig (21-103 kPa)

Wiring Terminations:Screw terminals

Air Capacity:200 scim (55 mL/s)

Air Connections:3/16" diameter barbs for 1/4" OD tubing; 1/8" FNPT gauge port

Air Consumption:28.8 scim (7.9 mL/s) @ 20 psig (138 kPa) supply

Maximum Pressure:30 psig (207 kPa)

Nominal Pressure: 20 psig (138 kPa)

Linearity:1% of full scale

Hysteresis:0.75% full scale

Operating Temperature:40° to 120℉ (4° to 49℃)

Operating Humidity:10 to 90% RH (non-condensing)

Weight:0.34 lb (0.15 kg)

Warranty:1 year

Certifications