• Direct connection to PCs for pneumatic control

• Two-wire loop powered or three-wire voltage models

• Easily accessible wiring terminal blocks

• Quick panel mounting with supplied snap-track

• High accuracy with low hysteresis

• Driftless operation with high repeatability

• AC/DC operation

Input Signal:

ETP-9500:4-20 mA or 0-10 VDC, jumper selectable

ETP-9510:2-10 VDC, 2 wire

ETP-9520:4-20 mA, 2 wire

Input Impedance:4-20 mA input: 400Ω min., 550Ω max.; 0-10 VDC input: >100 kΩ

Power Supply:4-20 mA input, loop powered, 2-10 VDC input, 24-30 VAC/VDC, 1.0 watt max.

Air Supply:20 psig (138 kPa) nominal, 30 psig (207 kPa) max.; clean, dry, oil-free air required

Output Air Capacity:141 ml/s (515 scim) max. @ 20 psig (138 kPa) supply

Max/Min Span:14 psig (97 kPa)/8 psig (55 kPa)

Lowest/Highest Offset:1 psig (7 kPa)/6 psig (41 kPa)

Wiring Terminations:Screw terminals for 14-22 AWG wire

Air Connections:Male barbed fittings for flexible 1/4″ OD pneumatic tubing

Air Consumption:5.66 ml/s (0.012 scfm) @ 20 psig (138 kPa) supply, maximum

Linearity:±1% of span

Hysteresis:±1% of span

Adjustments:Zero and span potentiometers

Operating Temperature:32° to 140℉ (0° to 60℃)

Operating Humidity:5% to 95% RH, non-condensing

Output Signal:3-15 psig (21-103 kPa) nominal, direct acting

Dimensions:3.3″H x 2.8″W x 2.0″D (8.4 x 7.1 x 5.1 cm)

-E Option:4.6″H x 3.3″W x 2.1″D (11.7 x 8.4 x 5.3 cm)

Approvals:CE, RoHS

Warranty:5 years