Thermostats and Controllers

T180 Series

Product Bar End
Product Bar End

T180 Series

Programmable Fan Coil Thermostats T180 Series

Programmable Fan Coil Thermostats


The Peco T180 Series is a 7-day, 4-event programmable FCU thermostat. The large ADA compliant backlit display shows temperature °F or °C with a simple push of a button and indicates fan and system status. The T180 is powered from 24-277 volts with direct-wired manual fan or auto-staging fan models. Remote temperature sensor, pipe changeover sensor, setback input and occupancy sensor inputs are all standard.


(Wholesale customers, log in for your special pricing)

QtyModelDescriptionIn StockList PriceInternet Price
TA180-001 7 DAY PROG, 3 SPD 24-277VAC FC STATIn Stock627.00351.12


No accessories found
  • 7-day, 4-event schedule
  • 1H/1C and On-Off vent damper
  • H/C/A/O system switching
  • Fan switch Auto/On/Off
  • L/M/H manual fan speed or fan staging models
  • 24-277 VAC power
  • Large backlit ADA compliant display/buttons
  • Occupancy motion detector inputs
  • Door switch or setback input
  • Remote sensor and service alert input
  • Change over sensor input
  • Keypad lockout
  • 2-pipe or 4-pipe operation
  • Setback from occupancy or clock
  • Temperature or continuous set point display
  • Temperature offset display
  • Setpoint limits, H and C
  • Fan off delay
  • H/C setback selection
  • Easy occupant switched °F or °C display

Supply Voltage:24-277 VAC @ 1 VA, ±10%, 50/60 Hz

Setpoint:50° to 90°F (10° to 32°C), adjustable

Sensor Type:Built-in 10K thermistor Type II

Remote Sensor:10K thermistor Type II, acc. required

Output Control:6-SPST relays

 :H/C/Damper, Fan-L/M/H

Output Amps:(put spec table here)

 :Note: Combined load not to exceed 20A

Control:Proportional plus Integral (PI)

Dead-band:3°F, (1.6°C)

Setback (H/C):55° to 90°F (13° to 32°C), adjustable 8°F (4.4°C) minimum separation

Keypad Lockout:All buttons disabled except setpoint

Display:1" x 1.5" backlit digital display Room temp., setpoint, system and fan status

Display Offset:±9°F (5°C), in 1°F (0.5°C)


Button Controls:

 :Up, Down Temperature select

 :System Heat/Cool/Auto/Off/Setback

 :Fan Control On Hi-Med-Lo/Auto Hi-Med-Lo

 :Program Clock-°F/°C -Set-Copy-Hold

Switch Cycles:100,000 cycles

Termination:6" flying leads 18-14 AWG


Mounting:Horizontal on wall. Screw direct or 4" x 4" back box

Operating Temperature:130°F (54°C)

Operating Humidity:98% RH non-condensing

Enclosure Rating:NEMA 1, Vinyl plastic

Dimensions:4.4"H x 5.8"W x 1.4"D

 :(11.2 x 14.7 x 3.5 cm)

Approvals:UL File# E50023 and ADA compliant

Warranty:5 year


Download Additional Data

document   Catalog Page
document   T180 Datasheet
document   T180 Install Guide