Specifications and design subject to change without notice.:
Screen:
:Type Active color LCD with LED back lighting, 128 x 128 pixels
:Dimensions 1.00″ x 1.04″ (25 x 26 mm)
Case Material:White flame-retardant plastic
Mounting Backplate mounts to a standard 2″ x 4″ vertical handy-box or Euro style box. The controller is secured to the backplate with a concealed Allen screw.:
Environmental Limits:
:Operating 32° to 140℉ (0° to 49℃)
:Shipping -40° to 160℉ (-40° to 71℃)
:Humidity 0 to 95% RH non-condensing
Supply Voltage:24 VAC (–15%, +20%), 50-60 Hz, 12 VA, Class 2 only, non-supervised (all circuits, including supply voltage, are power limited circuits)
Inputs and Outputs:All inputs and outputs for the AppStat are set up at the factory and do not require set up in the field.
Inputs:Analog inputs for discharge air temperature, water supply temperature, outside air temperature, fan status, and remote temperature sensor
:Sensors are automatically detected
:Inputs accept industry-standard 10K ohm Type II for space, 10K ohm Type III for duct
:Input overvoltage protection up to 24 volts AC, continuous
:12-bit analog-to-digital conversion
Relay Outputs:All relay outputs are normally open, SPST, Form “A” relays
:1 Ampere maximum per relay at 24 volts AC or DC for each output. Maximum for all relay outputs is 3 amperes (72VA)
Analog Outputs:Short-circuit protected
:Loads up to 10 mA at 0–12 VDC
:8-bit PWM digital-to-analog conversion
Connections:Screw terminal blocks, wire size 14–22 AWG, for inputs, outputs, power, and network connections.
BACnet communication:Integral peer-to-peer BACnet MS/TP network communications.
:Network speed from 9600 to 76,800 baud
:Automatic baud detection.
:Screw terminal block mounted to backplate. Wire size 14–22 AWG
:Front panel selection for device instance, MAC address, and baud rate
:Meets or exceeds ANSI/ASHRAE BACnet Standard 135-2008 for Application Specific Controllers.
Accuracy–Temperature Only Models:
:Type Thermistor
:Accuracy ±0.36℉ (±0.2℃)
:Resistance 10,000 Ω at 77℉ (25℃)
:Operating Range 48° to 96℉ (8.8° to 35.5℃)
Accuracy–Temperature and Humidity Models:
Temperature Sensor:
:Type CMOS; 10K Type II Space, 10K Type III Duct
:Accuracy ±0.9℉ offset (±0.5℃) from 40° to 104℉ (4.4° to 40℃)
:Resolution ±0.1℉ (±0.1℃)
:Operating Range 36° to 120℉ (2.2° to 48.8℃)
:Response time 5 to 30 seconds
:Remote 10KΩ Type II for Space, 10KΩ Type III for Duct
Humidity Sensor:
:Type CMOS
:Humidity 0 to 100% RH
:Accuracy @ 25℃ ± 2% RH (10 to 90% RH)
:Response Time 4 seconds or less
Regulatory approvals:UL 916 Energy Management Equipment, File #E145832
:FCC Class A, Part 15, Subpart B and complies with Canadian ICES-003 Class B
:BACnet Testing Laboratory listed
:SASO PCP Registration KSA R-103260
Motion Sensor:
:Detector Type Passive infrared
:Range 33' (10 m)
Dimensions:5.12″H x 3.50″W x 1.13″D (130 x 89 x 29 mm)
Weight :0.38 lb (0.17 Kg)
Warranty:5 years
