Print 
Email 
T7350B1002 | Honeywell | Thermostats & Controllers
2H/2C STD OR 3H/2C HP STAT
Brand:Honeywell
MPN:T7350B1002
SKU:T7350B1002
product specifications
Type
Programmable
Set Point Range
40 to 99 °F
Display
LCD
Controls Outputs
2H/2C
Supply Voltage (Nominal)
24 VAC
product series specifications
Supply Voltage
20 to 30 Vac @ 5 VA, 50/60 Hz, W7350 100 to 240 Vac, 47 to 63 Hz, 0.5A
Accuracy
±1° F (±1°C).
Contact Rating
Running 1.5A maximum. Inrush 7.5A maximum.
Setpoint Range
Heating 40°F to 90°F (4°Cto 32°C).
Cooling 45°F to 99°F (7°C to 37°C).
Deadband °F (1°C)
Additional Specification
Finish (color) Trident White.
Battery
No batteries required
Battery Backup
W7350 5 minutes typical; shutdown begins within 10 seconds
Clock Accuracy
±1 min./month (30 days).
Communication Interface
W7350 Ethernet Two ports; One unused; 10/100 Mbps; RJ-45 connectors, Communication Card 78 Kbps FTT10 A LONÆ Adapter and LonWorksÆ communication driver, Unused two communication ports (RS-485 and RS-232)
Electrical Life
W7350 NPB-WPM-US wall plug power supply, Class-A device
I nput
Temperature 20K ohms. Humidity 0-10 Vdc. Outdoor 3000 PTC. Discharge Air 20K ohms. Occupancy Sensor
Dry contact switching 30 Vdc at 1 mA
Memory
W7350 64 MB SDRAM and Serial Flash
Modulation
4 to 20 mA with 510O maximum terminating resistance.
Operate Time
Minimum On Heat 1 minutes. Cool 3 minutes. Minimum Off (Cool and Heat Pump) 1 minute.
Contact Rating
Running 1.5A maximum. Inrush 7.5A maximum.
Throttling Range
Automatically adjusts based on heat/cool stages. Manually adjustable with TStat Spec software or PDA.
Operating Temperature
30°F to 110°F (-1°C to 43°C), W7350 32 to 122°F (0 to 50°C)
Operating Humidity
5% to 90% RH, noncondensing, W7350 5% to 95% RH, Non-condensing
Mounting
Mounts on subbase., W7350 DIN rail or screw
Enclosure Rating
W7350 Plastic chassis and cover
Dimensions
See Fig 1, W7350 6.3" (160mm) Width x 4.8" (122mm) Height (including connectors) x 2.4" (61mm) Depth
Weight
1.24 lb. (0.57 Kg)
Approvals
1 year
product series features
- 7-day programming with two Occupied and two Not Occupied periods per day
- Individual heat and cool setpoints for Occupied and Not Occupied periods
- Advanced configuration using TStatSpec software or PDA
- PID control minimizes temperature fluctuations
- Recovery ramp control automatically optimizes equipment start times based on building load
- Keypad multi-level lockout available with all models
- Remote sensor capability for temperature (including outdoor air and discharge air) and humidity sensors
- T7350M provides 2 modulating heat and/or cool outputs
- T7350H provides networking capability on LonWorks bus using Free Topology Transceiver (FTT)
- T7350H conforms to LonMark Space Comfort Profile for rooftop applications
- W7350 web-based controller supports up to 20, T7350H thermostats
more information & related documents
Series Description
The Honeywell T7350 Commercial Programmable Thermostat controls 24 VAC single zone heating, ventilating and air conditioning (HVAC) equipment. The T7350 consists of a thermostat and a subbase. The thermostat includes the keypad and display for 7-day programming and the subbase includes equipment control connections. T7350M models have 2 modulating outputs for heat and/or cool, and the T7350H models have LonWorks capability. The W7350 WebStat is a web-based building manager that allows contractors and facility managers to view and command T7350H Commercial Programmable Thermostats. It communicates over the LonWorks network to perform building management control of the T7350H thermostats through a web browser. It runs building management applications such as trending, scheduling and alarming. The WebStat Bundle (W7350A1000) includes the WebStat controller, a LON card, and a power supply.
Kele Description
2H/2C STD OR 3H/2C HP STAT
Manufacturer
Honeywell
T7350 Installation Instructions 
