AS3PD080D801BW2 | Minco Products | Temperature Sensors & Transmitters

DCP-1.5-W||DCPA-1.2||T81U-XR||T91U-XR||F-1000-331||UR

Air Handling Unit||Duct Temperature

Duct Temperature Sensor, Assembly Probe for Three-Wire RTDs, 100 RTD 385 Platinum Curve, 6" Leads, 8" Probe, Duct Mount, Handy-Box 1/2" knockouts, TT-801, Range Codes (0°/250°C), Sensor/Transmitter Matched at 0°C with NIST

NIST||Knockouts

Metalllic

NEMA 1

8.00"

100 RTD 385

TEMP SENSOR, DUCT, 100 RTD 385, 8.00", METALLIC ENCL, NO OUTPUT

RTD

The Minco Room, Duct, Outside Air, and Immersion Temperature RTD Sensors use a thin film platinum element for fast, accurate point measurement for energy and environmental control applications. The Model AS _ _ _ S industrial room-mount housing provides an accurate, professional appearance. This housing can either direct mount or mount directly to a standard handibox or wire mold. The Model AS _ _ _ D duct-mount sensor features a rugged, stainless steel probe mounted in a standard handibox, making installation quick and easy with self-tapping screws. The Model AS _ _ _ E uses a weather resistant box The Model AS _ _ _ O outside air sensor features a non-heat conductive, solar reflecting noncorrosive shield. This configuration is completely sealed against moisture in weather conditions. The slotted shield allows air to flow freely to the stainless steel probe to provide accurate measurement. Installation is made easy with a 1/2" female threads. The Model AS _ _ _ Q immersion probes are designed with a 1/2" tapered thread for easy installation in thermowells. The Model AS _ _ _ P uses a weather-resistant box.

DUCT 8IN 100 OHM TRANSMITTER 0/250C 3W HB NIST

Minco Products