SST200A | ACI | Network & Wireless

Lithium battery, two-year life 3V @60 sec (see Battery Life Chart)

Stainless steel, 2" (5 cm)

Thermistor, 15' cable

+/- 0.5ºF

20º to 110ºF (-28.8º to 43.3ºC) 

40º to 90ºF (4.4º to 32.2ºC)

0º to 100 ºF (17.7 to 37.8ºC)

30º to 150ºF (-1.1º to 65.6ºC)

100º to 220ºF (37.8º to 104.4ºC)

0º to 125ºF (-17º to 51ºC)

5% to 95% RH noncondensing

Plastic

0.5 lb (0.23 kg)

1.75"W x 3.1"H x 5.75"D (4.5 x 7.9 x 14.6 cm)

923.58 MHz

50 mW

0.5 sec to 30 min.

16.6 ms (factory set to 60 sec)

Direct sequence, spread spectrum

19.2 KBPS

Built into circuit board

FCC CFR part 15.247

12-bit converter

Unique for each system

50 addresses per system @ 30 sec intervals

Always 1

The Model SST1630K battery-operated radio frequency (RF) transmitter senses remote probe temperatures. Each sensor is individually configured with a unique address so that individual point information can be identified. The sensor/transmitter will transmit every 60 seconds and operate two years using an easily replaceable lithium battery. The transmitter operates at 923 MHz at 50 mW for an open-air effective range of 2700' (823m). There is no RF tuning, no external RF antenna, and no specific radio experience required to install or use the system. The RF signal uses proven spread-spectrum technology and requires no FCC license.

SST1630 BULLET PROBE SENSOR ONLY 20K

ACI