Print 
Email 
SST2630AE | ACI | Network & Wireless
WIRELS REMOTE/STRAP-ON TEMP. NEMA4 HOUSING
Manufacturer:ACI
MPN:SST2630AE
SKU:SST2630AE
List Price:
595.68
Today's Price:
333.58
add to cart
product family specifications
Device Operation
Supply Voltage
1 or 2, Lithium 3.0V 1400 mAh
Batteries
Duracell, DL123A, (Included)
Battery Life
4-5 years @75 second interval
Sensor Type
Temperature, 20K-2 thermistor internal
Probe length
Stainless Steel, 1/4″ dia x 2″ length
CL2P Cable (Cable length per order)
Transmitted Range Value
SST2630A
Overall Range, 40° to 200℉, (-40° to 93℃)
Transmitted Accuracy
Temperature
±1.0℉ (±0.55℃)
Indication
LED on Transmit and data link conformation
LED on Low battery
A/D resolution
12 bit (4095 counts)
Mounting
Direct to wall w/tabs
Wiring
None
Operating Temperature
14° to 140℉ (10° to 60℃)
Operating Humidity
5 to 65% RH (non-condensing)
Construction
Polycarbonate (NEMA 4), ABS (NEMA 1)
Enclosure Rating
NEMA 4 (UL 94 5VA), NEMA 1 (UL 94 HB)
Dimensions
1.75″H x 3.00″W x 5.75″D, Probe ∅ 0.25″, (4.44 x 7.92 x 14.6 cm)
Weight
1.2 lb (0.54 kg)
Warranty
1 year
NEXT COLUMN
Radio Transmitter
Protocol
Proprietary (ACI), IEEE 802.15.4-2003/2006
Data-Link LED confirms receiver reception
Frequency
902-928 MHz
Channel Network
1
Modulation
Direct Sequence Spread Spectrum (DSSS)
Transmit Power
11.2 mW (11 dBm)
Receiver Sensitivity
-110db
Open Air Range
5,280 ft (1,600m) Open air
200’- 500’ (61-152 m) in building
Low Battery Indication
Yes, LED
Transmission time
20ms
Transmission Interval
75 seconds standard, (Can be factory programmed at 300 sec)
Antenna
Internal
Channels
One
Device Addresses
100 transmissions per minute
Programming
Program cable & laptop (free SW)
Repeater Capable
Yes, (can increase open air range x2)
Compliance
FCC ID# T4F061213RSO, RoHS
product family features
- Battery included
- No calibration required
- No wiring needed
- Easy to install
- Battery powered sensors
- Mesh Network - easy to install and relocate sensors without additional wireless installation tools
- Sensor Data-Link LED confirms connection with Frontier 2.0 receivers
- Long battery life (approximately 4 to 5 years)
- Low battery LED + remote low battery alarm notification
- Reliable Spread Spectrum technology
more information & related documents
Family Description
The ACI Meshnet900™ SST2630 wireless remote sensor is encapsulated in a 0.25" OD 304 stainless steel probe. The sensor is used typically for a single point of temperature measurement in piping or ductwork. A Data-Link LED is used to confirm the receiver has received the data transmission. This eliminates the need for special wireless installation equipment or tools and allows for quick installation.
Kele Description
WIRELS REMOTE/STRAP-ON TEMP. NEMA4 HOUSING
Manufacturer
ACI
Related Documents
Recommended for You
