M2K-060T-RM-N6P | BADGER METER INC. | Flow

85-265 VAC (45-65 Hz)

15 W

±0.25% of flow rate for velocities greater than 1.64 fps (0.5 mps; ±0.004% for lower velocities

±0.1%

Maximum 30 VDC, programmable as positive zero return, external totalizer reset, or preset batch start

800 ohms @ 24 VDC

Analog output: 0-20 mA, 4-20 mA, 0-10 mA, or 2-10 mA

Digital outputs: Four configurable, 24 VDC sourcing outputs (maximum of two) 50 mA each or 100 mA total, sinking open collector outputs (maximum of four) 100 mA each or 30 VDC total, AC solid state relay (maximum of two) 48 VAC 500 mA maximum

Pulse outputs: Scalable up to 10 kHz, passive open collector up to 10 kHz active switched 24 VDC, up to two outputs (forward and reverse flow), pulse width programmable from 1 to 1,000 ms or 50% duty cycle

Frequency output: Scaleable up to 10 kHz open collector, up to 1 kHz solid state relay

Analog output: 0-20 mA, 4-20 mA, 0-10 mA, or 2-10 mA

Digital outputs: Four configurable, 24 VDC sourcing outputs (maximum of two) 50 mA each or 100 mA total, sinking open collector outputs (maximum of four) 100 mA each or 30 VDC total, AC solid state relay (maximum of two) 48 VAC 500 mA maximum

Pulse outputs: Scalable up to 10 kHz, passive open collector up to 10 kHz active switched 24 VDC, up to two outputs (forward and reverse flow), pulse width programmable from 1 to 1,000 ms or 50% duty cycle

Frequency output: Scaleable up to 10 kHz open collector, up to 1 kHz solid state relay

Analog output: 0-20 mA, 4-20 mA, 0-10 mA, or 2-10 mA

Digital outputs: Four configurable, 24 VDC sourcing outputs (maximum of two) 50 mA each or 100 mA total, sinking open collector outputs (maximum of four) 100 mA each or 30 VDC total, AC solid state relay (maximum of two) 48 VAC 500 mA maximum

Pulse outputs: Scalable up to 10 kHz, passive open collector up to 10 kHz active switched 24 VDC, up to two outputs (forward and reverse flow), pulse width programmable from 1 to 1,000 ms or 50% duty cycle

Frequency output: Scaleable up to 10 kHz open collector, up to 1 kHz solid state relay

Analog output: 0-20 mA, 4-20 mA, 0-10 mA, or 2-10 mA

Digital outputs: Four configurable, 24 VDC sourcing outputs (maximum of two) 50 mA each or 100 mA total, sinking open collector outputs (maximum of four) 100 mA each or 30 VDC total, AC solid state relay (maximum of two) 48 VAC 500 mA maximum

Pulse outputs: Scalable up to 10 kHz, passive open collector up to 10 kHz active switched 24 VDC, up to two outputs (forward and reverse flow), pulse width programmable from 1 to 1,000 ms or 50% duty cycle

Frequency output: Scaleable up to 10 kHz open collector, up to 1 kHz solid state relay

0.10 to 39.4 fps (0.03 to 12 mps)

Unidirectional or bidirectional with two separate totalizers (programmable)

High/low flow alarm, error alarm, empty pipe alarm outputs

1/2" NPT conduit connection and 3 cord grips on amplifier housing; 30 ft. standard length cable for remote mount configurations (other lengths available)

RS232 - Modbus RTU or remote display

Backlit, 4 line, 20 character LCD and 3-button progamming keys

Ounces, pounds, liters, US gallons, imperial gallons, barrels, hectoliters, megagallons, cubic meters, cubic feet, acre feet

1" to 24" standard (1/4", 1/2" and 28" to 54" also available), ANSI 150 RF flanges standard

Many fluid applications including hot or chilled water, glycol solutions; minimum conductivity 5.0 &#0181Ω/cm

178℉ (80℃) with rubber liner; 212℉ (100℃) with PTFE liner and local mount amp; 311℉ (155℃) with PTFE liner and remote mount amp

285 psig at ambient temperature, refer to ANSI B16.5 standard for 150 lb RF flanges for temperature/pressure spec

-4° to 140℉ (-20° to 60℃)

Up to 90% non-condensing

The Badger Meter M-2000 Series magnetic flow meter is the result of years of research and field use in electromagnetic flow meters. The M-2000 can measure almost any liquid, slurry or paste that has minimum electrical conductivity. These meters are perfect for flow measurement in commercial HVAC water systems, wastewater, reclaimed water, irrigation and industrial applications because they can handle suspended solids, have no pressure drop, no moving parts, and their accuracy is not affected by temperature, pressure, viscosity, density or flow profile. They are NSF listed for use in potable water. The ANSI 150 RF flanged pipe spool makes them easy to install and they are available with the NEMA 4X (IP66) integral amplifier (transmitter and display housing) mounted atop the flow detector housing, or with the amplifier remotely mounted. For the remote mount configuration, a 30 ft. cable is standard (other lengths available) and the detector housing comes with either a NEMA 4X or NEMA 6P (submersible) junction box. Each meter is factory calibrated and tested and a certificate is included.

M2000 MOD METER/6IN/PTFE/REM MNT/N6P JBOX

BADGER METER INC.