VBB2N02+M313A00 | Schneider Electric Buildings | Control Valves

24 Vac for floating and proportional

110 to 230 Vac for two position multi-voltage types

See Table-1, Table-2, and Table-3. in Datasheet

2-Position, Floating, or Proportional; half wave rectified power supply

See Table-1, Table-2 and Table-3. in Datasheet

Standard on all models.

SPST 24 Vac/Vdc, 101 mA…5 A max.

Thermoplastic base and cover. Approved for use in air plenums.

-40° to 169℉ (-40° to 76℃).

Floating 32° to 140℉ (0° to 60℃)

Proportional 32° to 140℉ (0° to 60℃)

Two-Position 32° to 169℉ (0° to 76℃)

Humidity 5…95% relative humidity, noncondensing.

NEMA 2, IEC IP31. Indoor Use Only.

PTFE.

Glass-filled PEEK.

1/2″, 3/4″ (2 way or 3 way)

Hot and chilled water, up…60% glycol.

600 psi (4137 kPa).

20° to 250℉ -(7° to 121℃)

See Table-4, Table-5, Table-6, and Table-7. in Datasheet

130 psi Two-Way; 70 psi Three-Way

30 psi normal operation

20 psi quiet operation.

ANSI class IV (0.01%) at both A and B ports with pressure at inlet.

NPT threaded (VBxxNxx) and Rp threaded (VBxxRxx).

Greater than 300:1.

Forged brass.

Stainless steel anti-blow out stem with dual Viton™ o-rings.

Chrome plated brass (VBB series) or stainless steel (VBS series).

UL, cULus, RoHS, REACH

The Schneider Electric VBB/VBS Ball Valves Series are interchangeable valves and valve actuators, making it simple to implement upgrades and accommodate building system changes. As assemblies, the SmartX valve actuators and VBB/VBS ball valves series give users the freedom and flexibility to easily optimize and precisely control a wide variety of applications. They also accept floating and proportional control signals from a DDC system, controller, or thermostat for control of hot or chilled water, and solutions of up to 60% glycol. This makes them ideal for installation in VAV re-heat, fan-coil, and unit ventilation applications. The VBB/VBS Series proportional actuators allow easy configuration of control signals via Dip Switch. Dip Switches are accessed conveniently through an easy to open access hatch on the side of the actuator, eliminating the need to remove the cover of the actuator. Kele is the leading supplier of building automation products. When you need the right product, right now, count on Kele.

1/2IN/2W/W/24V/PROP/SR/NO/ACT

Schneider Electric Buildings