DM7600B1020 | Honeywell | Actuators & Dampers

6" round through 16" round (even sizes)

Round, single-blade, 90° rotation

1/2" (1.3 cm) diameter shaft, 3.9" (9.9 cm) length, CW to open, 90°

Pre-drilled holes to fit Honeywell or Kele 35 in-lb or 44 in-lb actuators

Less than 35 in-lb (4 Nm)

4" WC (1.0 kPa)

2500 ft/min (17.8 m/s)

12.5 cfm per sq. ft. @ 1″ WC

17.6 cfm per sq. ft. @ 2″ WC

21.6 cfm per sq. ft. @ 3″ WC

25.0 cfm per sq. ft. @ 4″ WC

The Honeywell D690 Series round control dampers are low-leakage, single blade dampers designed for use in conventional air handling system round ductwork. They come standard with an actuator mounting bracket that accommodates the Honeywell ML6161/ML7161/MN6105/MN7505 which are shown as the DM7600 Series model numbers. These can also be used with the Kele KA-35/KA-44 direct-coupled actuators. The dampers are available for standard same-day shipping from Kele with or without an actuator pre-mounted.

10IN D690A1028 W/HON NSR FLOAT ACT

Honeywell