Pressure

PSD-30 Series



Product Bar End
Product Bar End

PSD-30 Series

Pressure Transmitter & Switch w/ Display PSD-30 Series

Pressure Transmitter & Switch w/ Display

 

The design and outstanding functionality of the Wika PSD-30 pressure transmitter and switch received the IF Product Design Award in 2009. The large, ergonomically designed programming push buttons provide the user with tactile feedback for immediate confirmation that the touch event was registered by the transmitter. The user-friendly menu navigation layout meets the new German Engineering Federation (VDMA) Standard form for fluid sensors (24574-1, Part 1, pressure switch). The goal of the VDMA is to simplify the use of pressure switches by standardizing menu navigation and display parameters.The PSD-30 can be adjusted three different ways to fit specific installation requirements. The display and electrical connection can be rotated independently to maximize visibility while still orienting the electrical connection in the best position for the cable connector. If the transmitter is installed overhead or upside down the display can be electronically rotated 180°.Time tested, proven WIKA thin film and piezoresitive pressure sensor technology is an integral part of the PSD-30 providing the high quality and long term reliability users demand.


Products

(Wholesale customers, log in for your special pricing)

QtyModelDescriptionIn StockList PriceInternet Price
14086886 PSD-30 CABLE W CONNECTOR 5 PIN IP67 UL LISTED 7FTINFO74.2737.13
14086887 PSD-30 CABLE W CONNECTOR 5 PIN IP67 UL LISTED 16FTINFO109.1654.58
14086888 PSD-30 CABLE W CONNECTOR 5 PIN IP67 UL LIST 32FTINFO173.6386.81
PSD-30-01 PRESS SW, ADJUST, 30" HG VACUUM-0 PSIINFO1,277.83638.92
PSD-30-02 PRESS SW, ADJUST, 30" HG VACUUM-100 PSIINFO1,277.83638.92
PSD-30-03 PRESS SW, ADJUST, 0-15 PSIINFO1,222.45611.23
PSD-30-04 PRESS SW, ADJUST, 0-25 PSIINFO1,179.62589.81
PSD-30-05 PRESS SW, ADJUST, 0-50 PSIINFO1,222.45611.23
PSD-30-06 PRESS SW, ADJUST, 0-100 PSIINFO1,222.45611.23
PSD-30-07 PRESS SW, ADJUST, 0-200 PSIINFO1,222.45611.23
PSD-30-08 PRESS SW, ADJUST, 0-500 PSIINFO1,222.45611.23
PSD-30-09 PRESS SW, ADJUST, 0-2000 PSIINFO1,222.45611.23
PSD-30-10 PRESS SW, ADJUST, 0-3000 PSIINFO1,222.45611.23
PSD-30-11 PRESS SW, ADJUST, 0-5000 PSIINFO1,222.45611.23

Accessories

No accessories found
Features
  • Available with single or dual Negative-Positive-Negative (NPN) or Positive-Negative-Positive (PNP) solid state switches
  • High visibility, rugged 14-segment red LED display electronically rotates 180° for top-down installation
  • User-friendly, intuitive 3-key operation
  • Versions with 4-20 mA or 0-10V analog output available
  • Programming menu meets VDMA Standards for user friendly navigation.
Specifications

Supply Voltage:

Current output 15 to 35VDC @<100mA:

Voltage output 15 to 35VDC @<100mA:

Signal Output (Volts,Current) 0-10VDC, 4-20mA sourcing:

Min Voltage Output Impedance 10KΩ:

Max Current Output Impedance 500Ω @24VDC:

Contact type Two Triac, 250mA @(Pwr supply volts -1v):

Setpoint adjust LL range + 0.5% of span to UL range:

Differential LL Range to Setpoint - 0.5% of span:

Accuracy ±1% of span Full scale (includes linearity, repeatability and Hysteresis):

Sensor Type Piezoresistive:

Adjustments (Z/S) Pressure Setpoint and Hysteresis:

Normal Measurement Range Vacuum to 5000 PSIG (See ordering):

Display Digital LED w/3.5 Red digits, 0.35″ High:

Overpressure (Burst) 5800 to 34,800 PSI (400 to 2400 bar):

Max Operating Pressure (Proof) 11,600 to 17,400 (80 to 1200 bar):

Operating Temperature -4° to 185℉ (-20° to 85℃):

Compensated Temp. Range 32° to 176℉ (0° to 80℃):

Operating Humidity 0 to 90% Non-condensing:

Wetted Parts 316 and >150PSI PH13-8 Stainless Steel:

Media Compatibility Liquid or Gas compatible w/316 & 13-8 SS:

Process Connection 1/4″ FNPT:

Wiring Terminations 5 wire pigtails in 6’ cable:

Mounting By process connection:

Enclosure Rating 316 SS and plastic NEMA 1:

Dimensions ˜3.31″H x 2.32″Dia, (8.4 x 5.9 cm):

Weight 0.44lb (0.2kg):

Approvals CE, cULus, RoHS:

Warranty 2 year:

Certifications