• 2% full-scale accuracy

• Easy-to-read 4" (10.16 cm) white dial and red-tipped pointer

• Flush or surface mounting

• Easily accessible zero adjustment

• Corrosion-resistant cast aluminum housing

• Back and side connections

Supply Voltage (If Used): Not Required

Readout (Analog, digital etc.) : Red tip needle w/ white back ground

Dial (white, mirrored, LCD, LED, Stop pins Etc.): 4″ half dial w/ graduations per order

Window Material, (Glass, Polycarbonate etc.): Clear acrylic plastic

Indication Scale: Selectable by order (″WC)

Accuracy :± 2% of Full scale @70℉

 : (-00) ± 4% of Full scale

Calibration (adjustable, Fixed, Etc.): Manual zero adjust by center screw

Sensor principle (Balanced, Bourdon tube, Capacitive): Silicone diaphragm

Operating Pressure Ranges :-1″ WC to 10″WC

Overpressure (Burst): -20 in Hg to 15 psig (-67.75 to 103.45 kPa)

Max Operating Pressure (Proof): -20 in Hg to 15 psig (-67.75 to 103.45 kPa)

Operating Temperature: 20° to 140℉ (-7° to 60℃)

Operating Humidity: 0 to 95% Non-condensing

Wetted Parts: Silicone, aluminum, acrylic, polycarbonate and steel

Media Compatibility :Inert Dry Air

Process Connection: Two 1/8″ FNPT (H/L), (Back & Side ports)

Connection Accessories: Two 1/8″ FNPT barbed fittings & plugs (included)

Mounting :Vertically, Three flush mounting tabs (included)

Wiring Terminations: (if needed) None required

Enclosure Case Rating: Aluminum housing w/Clear Acrylic face

Enclosure Rating: NEMA 1

Dimensions: ˜4.75 diameter (4.5″ hole) x 1.69″D (12.6 (11.43) x 4.29cm)

Weight: 1.2lb. (0.51kg)

Approvals: RoHS

Warranty: 1 Year