Power Monitoring and Protection

SSC Series



Product Bar End
Product Bar End

SSC Series

Sure-Set Model SSC Current Switch SSC Series

Sure-Set Model SSC Current Switch

 

Setra's Sure-Set SSC Series split core current switch provides a unique approach to calibration and installing current sensors that eliminates exposure to Arc Flash hazards while providing a fast and accurate method of setting the proper current switch set point for the application. By eliminating the need to work on a live electrical enclosure, the Sure-Set Current Switch allows installation without the need to use Arch Flash Rated Personal Protective Equipment (PPE). Using the 9 position, Sure-Set Selector, the installer simply sets the selector to the rated motor HP, snaps the Sure-Set onto the sensed conductor (make sure the enclosure is not live!), connects the signal leads, closes the enclosure and powers up the system. No further calibration is required. In fact, the engineer or installer can pre-configure each Sure-Set current switch prior to arriving at the job site, making the on-site install time for the current switches even quicker. The ability to customize the Sure-Set for each job means that the installer can install the Sure-Set on a variety of different powered motors, reducing the need for any excess inventory.


Products

(Wholesale customers, log in for your special pricing)

QtyModelDescriptionIn StockList PriceInternet Price
CCR-12 OPTIONAL SNAP ON RELAY (12VAC/DC)-(W/ SURE-SET)INFO63.0035.28
CCR-24 OPTIONAL SNAP ON RELAY (24VAC/DC)-(W/ SURE-SET)INFO63.0035.28
SLA-440-ALE TOWER UNITINFO821.60460.10
SSC-2H SURE SET DIGITAL SC CURRENT SW (HIGH V, LOW HP)INFO127.0071.12
SSC-4H SURE SET DIGITAL SC CURRENT SW (HIGH V, HIGH HP)INFO127.0071.12
SSC-4S SURE SET DIGITAL SC CURRENT SW (STD V, HIGH HP)INFO127.0071.12

Accessories

No accessories found
Features
  • Eliminate arc flash hazard - no need to work in a live enclosure
  • Scaled in motor Hp
  • 9 motor Hp ranges per model
  • De-rating built-in from full load amps (FLA)
  • Recessed actuaator for pre-configuration
Specifications

Supply Voltage:Induced from monitored power conductor cable

Frequency: 50/60 Hz

Continuous Current:135A, 600 VAC

Motor Hp Range:

 :SSC-2S 1, 2, 3, 5, 7.5, 10, 15, 20, 25

 :SSC-2H 5, 7.5, 10, 15, 20, 25, 30, 40, 50

 :SSC-4S 2, 3, 5, 7.5, 10, 15, 20, 25, 30

 :SSC-4H 15, 20, 25, 30, 40, 50, 60, 75, 100

Trip Point: 35% below FLA @ selected Hp value

Switch Adjustment:

 :SSC-2S & SSC-2H 9 Position set point for 230 VAC motor applications

 :SSC-4S & SSC-4H 9 Position set point for 480 VAC motor applications

Switch Positions:Normally open

Switch Selection:Adjustable

Operating Temperature:5° to 140℉ (-15° to 60℃)

Operating Humidity: 0-95% non-condensing

Window Size: 0.72″ x 0.78″ (1.8 x 2.0cm)

Dimensions:

 :SSC-2S & SSC-4S 2.7″ x 2.56″ x 1.08″ (6.9 x 6.5 x 2.7 cm)

 :SSC-2H & SSC-4H 2.7″ x 2.56″ x 1.73″ (6.9 x 6.5 x 4.4 cm)

Weight: 0.35 lb (0.16 kg)

Approvals: Ul Listed File#E317719, UL508, CE, RoHS

Meets ARRA or BAA:Yes

Warranty: 2 Years

Certifications