Power Monitoring and Protection

Sentry 100 Series



Product Bar End
Product Bar End

Sentry 100 Series

Current Transducers With Voltage Output Sentry 100 Series

Current Transducers With Voltage Output

 

The Sentry 100 Series AC Current Transducers with Voltage Output can be used to directly monitor up to 200A and output a 0-5 VDC or 0-10 VDC signal. The Sentry 100 Series is available in a split-core design that allows for easy installation of the transducer on existing wiring or in a lower-cost solid-core version.


Products

(Wholesale customers, log in for your special pricing)

QtyModelDescriptionIn StockList PriceInternet Price
100-1L CURRENT TO VOLTAGE TRANSDUCERINFO124.2469.57
100-2L CURR TO VOLTAGE XDUCER 0-100, 0-150, 0-200A;0-5VDCINFO124.2469.57
100-3L CURRENT TO VOLTAGE TRANSDUCER, 0-50A, 0-10VDCINFO124.2469.57
100-4L CURR TO VOLTGE XDUCER 0-100, 0-150, 0-200A;0-10VDCINFO124.2469.57
SC100-1L CURR TO VOLTGE XDCR SPLIT, 0-10,0-20,0-50A, 0-5VDCIn Stock143.0680.11
SC100-2L CURR TO VOLTGE XDCR SC, 0-100,0-150,0-200A, 0-5VDCIn Stock143.0680.11
SC100-3L CURRENT TO VOLTAGE XDCR, SPLIT, 0-50A, 0-10VDCINFO149.4683.70
SC100-4L CURR TO VLTGE XDCR SC, 0-100,0-150,0-200A, 0-10VDCINFO143.0680.11

Accessories

No accessories found
Features
  • May eliminate the need for a current transformer
  • Small size
  • No power supply needed
  • Easily installed over existing cable with split-core model
  • UL listed, CE certified
Specifications

See catalog page for complete specifications::

100-1L, 100-3L:0-50A

SC100-1L, SC100-3L:0-50A

100-2L, 100-4L:0-200A

SC100-2L, SC100-4L:0-200A

Output:0-5 VDC or 0-10 VDC

Accuracy:± 1 % FS over 5-100% of range

Loading:1 M-ohm required for rated accuracy; 100 k-ohm load add 1.3% error

Power supply:None required

Frequency:50-60 Hz

Isolation:UL Listed to 1270 VAC

Response time:100 ms, 0-90%

Operating temp:-58 to 149℉ (-50 to 65℃)

Case:Thermoplastic (meets UL flammability rating 94V-0)

Weight:0.3 lb (0.12 kg)

Warranty:5 years

Note: The Sentry 100 Series is average responding and not suitable for use on the load side of VFDs. Refer to the Sentry 200 Series to monitor VFDs:

Certifications