Power Monitoring and Protection

MPA-2



Product Bar End
Product Bar End

MPA-2

Meter Pulse-to-Analog Transducer MPA-2

Meter Pulse-to-Analog Transducer

 

The Model MPA-2 meter pulse-to-analog transducer accepts kWh totalizer pulses from a utility meter and calculates kW demand using a 5, 15, or 30-minute sliding window averaging scheme. The average kW demand value is provided as a milliamp or voltage signal, which can be read by a BAS. The average kW demand can also be displayed using panel meter indicators such as the LPI Series.


Products

(Wholesale customers, log in for your special pricing)

QtyModelDescriptionIn StockList PriceInternet Price
MPA-2 METER PULSE/ANALOG CONVERTERINFO285.77160.03

Accessories

No accessories found
Features
  • Converts kWh pulses to an analog kW signal
  • Both milliamp and VDC signals available
  • 5, 15, or 30-minute sliding window selection
  • 24 VAC/VDC power
  • Adjustable zero and span
  • Snap track-mounted
  • Furnished with complete instructions
Specifications

Supply Voltage:24 VAC ±10% or 24 VDC ±10%

Supply Current:

 : 120 mA maximum @ 24 VAC

 :50 mA Maximum @ 24 VDC

Dip Switches:Sliding window size is DIP switch-selectable for 5-, 15-, or 30-minute periods; kWh pulses to produce full-scale output are DIP switch selectable from 10 pulses per period to 18,000 pulses per period

Input Signal:24 VAC/VDC switched through electronic or mechanical contact closure

 :Input Current 15 mA non-inductive at 24V

 :Max Pulse Rate 10 pulses/seconds

Output Signal:4-20 mA factory set, adjustable 0-20 mA zero and span; 2-10 VDC factory set, adjustable 0-18 VDC (both outputs can be used simultaneously)

Output Impedance:Maximum output resistance 650Ω for mA output; maximum current available from voltage and current outputs combined is 25 mA

LED Indication:

 :Green status LED (L2)

 :Steady green = normal

 :Slow flashing green = calibration mode

 :Rapid flashing green = kW demand overflow

 :Red signal LED (L1) = contact closure on the utility meter kWh contacts (LED is off when contacts open)

 :Note: L3 and L4 stay ON during operation

Mounting:3.25" (8.3 cm) snap track (supplied with unit)

Dimensions:3.25"H x 4.6"W x 1"D

(8.3 x 11.7 x 2.54 cm):

Weight:0.39 lb (0.17 kg)

Warranty:18 months

Certifications


Download Additional Data

document   MPA-2 Catalog Page
document   MPA-2 Installation Sheet