Power Monitoring and Protection

DTS SMX Series

Product Bar End
Product Bar End

DTS SMX Series

Measurlogic Power Meters and Transducers DTS SMX Series

Measurlogic Power Meters and Transducers


The DTS SMX Series operates in any environment. It is easy to install and is designed to mount on any surface. This meter works with all “safe” 333mV, 5A or Rope current transformers (CTs) and requires no external power source to operate. A bright backlit DTS LCD display guides you through the convenient set-up process. The DTS SMX has some exciting features, including field configurable DIP switches, Fused Voltage Terminals, Auto-topology Phase Detection, on-board CT Reverse Algorithms for automatic correction of improper field mounted CTs and a weatherproof surface mount enclosure. For remote configurability, the DTS SMX comes with our free DTS Config software platform; conveniently choose from over 200 parameters at the frequency you require. The DTS SMX provides the most accurate data acquisition. Whether communicating via an RS-485 or Ethernet connection, the DTS SMX supports most accepted protocols, including Modbus RTU, Modbus TCP, BACnet MS/TP, BACnet/IP, SNMP, DNP 3.0 or LonWorks (model dependent). It easily integrates with Building Automation Systems and Energy Monitoring Software. Also, if you decide to integrate renewable energy sources in the future, the DTS SMX will conveniently operate as a Bi-directional NET meter. It is Designed and Manufactured in the USA and complies with the Buy American Provisions of ARRA Section 1605.


(Wholesale customers, log in for your special pricing)

Please call for product availability


No accessories found
  • Line powered single / three phase energy submeter
  • NEMA 4x weather-proof surface mount enclosure
  • Bi-directional for renewable systems (NET metering)
  • Interfaces with “safe” mV, RopeCTs or 1/5A CTs
  • Fused Voltage Terminals included for quick installation
  • Easy access voltage and current terminations
  • Embedded Ethernet connectivity – Modbus/TCP, BACnet/IP, SNMP or DNP 3.0
  • RS-485 connectivity – Modbus RTU or BACnet MS/TP
  • Communications setting via DIP switches for Modbus RTU
  • LonWorks FT-10 communications
  • Pulse output standard
  • 2 digital status/counter inputs OR digital outputs – optional
  • User configurable using DTS Config software
  • User-definable Modbus register area
  • Compatible with Energy Management Software suites
  • SunSpec Alliance certified
  • Designed and Manufactured in the USA. Complies with the Buy American
  • Provisions of ARRA Section 1605