Power Monitoring and Protection

CSR Series



Product Bar End
Product Bar End

CSR Series

Command Relay for CS or SC Sensors/Switches CSR Series

Command Relay for CS or SC Sensors/Switches

 

The Kele CSR-12VDC and CSR-24VAC/DC command relay attaches to the side of any full-size CS or SC type sensor or switch and adds a form C relay function. It provides line voltage switching with control either from an automation system digital output or from a CS/SC current switch. A status LED indicates the relay state and the relay output features both a normally-open and a normally-closed contact. The CSR-CS/SC combination provides a convenient solution when status indication and motor control are needed at a single location. The CSR can accept a digital control signal from the controller to activat the relay contacts which can be used to provide power to the motor contactor to start the motor. The CS/SC switch will then provide a digital proof-of-flow signal to the controller to indicate motor status.


Products

(Wholesale customers, log in for your special pricing)

QtyModelDescriptionIn StockList PriceInternet Price
CSR-12VDC 12VDC COMMAND RELAY, 25 MA MAX, SPDT FORM C In Stock57.9546.36
CSR-24VAC/DC 24 VAC/VDC COMMAND RELAY, 13 MA MAX, SPDT FORM C In Stock57.9546.36

Accessories

No accessories found
Features
  • Can be mounted to any CS or SC product for easier installation (Not applicable for CS Mini versions)
  • Convenient Relay Status LED
  • Can be factory assembled with any CS or SC product
  • SPDT Form C relay contacts
  • Environmentally-friendly cadmium-free contacts
  • Ideal for switching contactors, solenoids and motors
  • Small compact size
Specifications

Coil Voltage:

 :CSR-12VDC 12 VDC ± 10%

 :CSR-24VAC 24 VAC/VDC ± 10%

Coil Current:

 :CSR-12VDC 25 mA maximum

 :CSR-24VAC 13 mA maximum

Relay Contacts:SPDT Form C (NO + NC)

Contact Rating:5A @ 250 VAC / 30 VDC resistive

3A @ 250 VAC / 30 VDC inductive:

Contact Resistance:30 mΩ maximum

Operating Temperature:5° to 140℉ (-15° to 60℃)

Operating Humidity:5-90% RH non-condensing

Wiring Connection:Terminal block (14 to 22 AWG)

Dimensions:2″ x 1.4″ x 0.83″ (50.8 x 35.6 x 21.1 mm)

Enclosure Material:ABS/PC, UL94 V-0

Certifications








Download Additional Data

document   Catalog Page
document   CSR Series Install Guide
document   CSR Series Spec Sheet