Pneumatics and Fittings

MCP Series



Product Bar End
Product Bar End

MCP Series

KMC Pneumatic Actuators

 

KMC MCP-8031 pneumatic actuators are designed to control small dampers in HVAC air handling systems or air terminal units. They feature a right-angle bracket for mounting to the side of VAV terminals, ductwork, or damper frame. The metal body is also suited to ceiling plenum installations where nonmetallic actuators are not allowed. The actuator may be rotated in its bracket (supplied on most models) so air connections can be made where needed. Actuators are supplied with a clevis and optional clevis/cotter pins or crank arm linkage.


Products

(Wholesale customers, log in for your special pricing)

QtyModelDescriptionIn StockList PriceInternet Price
MCP-0303 ACT 3X3 5-10 STD INFO272.00217.60
MCP-10302112 3-12 PSI RIGHT ANGLE 3/8 SHAFT INFO428.00342.40
MCP-10405212 8-13 PSI RIGHT ANGLE 3/8 SHAFT INFO499.00399.20
MCP-11402520 3-12 PSI REAR POST-MOUNTED INFO815.00652.00
MCP-6001 VALVE TOP 5 SQ IN 3-8 PSI INFO114.0091.20
MCP-80312101 PNEU ACT/3-12 PSI/BRZ BUSHING/CLEVIS COTTER INFO153.00122.40
MCP-80312111 PNEU ACT/3-12 PSI/BRZ BUSHING/LINKAGE 1/2 SHAFT INFO335.00268.00
MCP-80313101 PNEU ACT/5-10 PSI/BRZ BUSHING/CLEVIS COTTER In Stock160.00128.00
MCP-80313102 PNEU ACT/5-10 PSI/PLASTIC BUSHING/NO CLEVIS INFO160.00128.00
MCP-80313111 PNEU ACT/5-10 PSI/BRZ BUSHING/LINKAGE 1/2 SHAFT INFO335.00268.00
MCP-80315101 PNEU ACT/8-13 PSI/BRZ BUSHING/CLEVIS COTTER INFO160.00128.00
MCP-80315111 PNEU ACT/8-13 PSI/BRZ BUSHING/LINKAGE 1/2 SHAFT INFO335.00268.00
MCP-80318111 PNEU ACT/4-8 PSI/BRZ BUSHING/LINKAGE 1/2 SHAFT INFO335.00268.00
VTD-1405 CRANK ARM LONG SLOT FOR 1/2 SHAFTS(5 PAK) INFO209.00167.20
VTD-1500 POSITIONER FEEDBACK ARM INFO113.0090.40
VTD-2250 FEEDBACK SPRING 5 PSI 3 IN PLASTIC (5PAK) INFO251.00200.80
VTD-2251 FEEDBACK SPRING 5 PSI 4 IN PLASTIC(5PAK) INFO251.00200.80
VTD-2252 FEEDBACK SPRING 5 PSI 5 IN PLASTIC(5PAK) INFO251.00200.80
VTD-9423 KREUTER 3 INCH DIAPHRAGM INFO43.0034.40
VTD-9424 KREUTER 4 INCH DIAPHRAGM INFO58.0046.40

Accessories

No accessories found
Features
  • The metal body is ideal for ceiling installations
  • Mounting bracket supplied on all models except -2099 and -3003
  • Crank arm linkage or direct connection between damper and actuator shaft available
Specifications

Effective Area:8 sq. inches (52 sq. cm)

Stroke:1-11/16" (43 mm)

Supply Connection:3/16" (5 mm) OD metal fittings

Supply Pressure:0 to 20 psi (138 kPa) operating, 30 psi (207 kPa) maximum

NOTE: If application requires operation near:

maximum temperature AND maximum:

pressure, install a tubing restraint at the:

actuator connection.:

Temperature Limits::

Operating:-20° to 180℉ (-29° to 82℃)

Shipping :-40° to 180℉ (-40° to 82℃)

Material:

 :Body CRS with zinc and dichromate

 :Diaphragm Neoprene

Bearings:Bronze or Delrin (plastic)

Shaft:CRS with nickel plating

Weight:2.0 lb. (0.9 kg)

Damper Rating @ 1000 fpm (5.08 m/s):

 :Gradual 8 sq. ft. (0.74 sq. m)

 :Two-position 10 sq. ft. (0.93 sq. m)

Spring Ranges and Retracted/Extended Torque:

(Based on 0 and 20 psi applied):

 :3–8 psi (21–55 kPa), 20/81 in-lb. (2/9 N•m) @ 90°

 :4–8 psi (28–55 kPa), 27/81 in-lb. (3/9 N•m) @ 90°

 :3–12 psi (21–83 kPa), 20/54 in-lb. (2/6 N•m) @ 90°

 :5–10 psi (34–69 kPa), 34/67 in-lb. (4/8 N•m) @ 90°

 :8–13 psi (55–90 kPa), 54/47 in-lb. (6/5 N•m) @ 90°

Tolerance:+0.5/-1.0 psi at start point and

 :±1.0 psi at finish point

Certifications




Download Additional Data

document   MCP Series Catalog Page
document   MCP Series Datasheet