Network and Wireless

WT2630, WH2630



Product Bar End
Product Bar End

WT2630, WH2630

Meshnet900™ Wireless temperature & humidity wall transmitters WT2630, WH2630

Meshnet900™ Wireless temperature & humidity wall transmitters

 

The ACI Meshnet900™ WT2630 wireless temperature sensors and WH2630 Wireless Humidity Sensors are programmed with unique transmitter IDs so that individual room information can be identified. No field programming required. The override button (B & C models only) located on the side of the sensor housing can be assigned to a digital output in the Meshnet family of receivers for occupancy override or similar applications. The setpoint adjustment (B Model only) can be assigned to an analog output in a Meshnet receiver. The output will then be used by a controller temperature setpoint or other applications such as dimming of light, and window blinds control.


Products
Filter:

(Wholesale customers, log in for your special pricing)

QtyModelDescriptionIn StockList PriceInternet Price
EXPDL123 3.0V LITHIUM BATTERIES (PACK OF 10) INFO258.64206.91
WT2630A WIRELS WALL TEMP SENSOR In Stock420.15336.12
WT2630B WIRELS WALL TEMP SENSOR W/ SETPOINT/PUSH BUTTON INFO461.62369.30
WT2630C WIRELS WALL TEMP SENSOR W/ PUSH BUTTON ONLY INFO459.44367.55

Accessories

No accessories found
Features
  • Battery powered sensors (Battery included)
  • No wiring and no calibration required
  • Set point slider and override button optional
  • Mesh Network - easy to install and relocate sensors
  • Sensor Data-Link LED confirms connection
  • Long battery life (approximately 4 to 5 years)
  • Low battery LED plus remote low battery alarm
Specifications

Device Operation:

Supply Voltage:Lithium 3.0V 1400 mAh

Batteries:Duracell, DL123A, (Included)

Battery Life:˜ 4-5 years @75 second intervals

Sensor Type:Temperature, 20K-2 thermistor internal

Optional:Humidity, Capacitive, internal

Probe length :

DT2630:1/4″ dia x (4″, 6″, 8″, 12″, 18″) length per order

DH2630:3/4″ dia x 9.75″ long

Transmitted Range Value :

DT2630A Temp. Overall Range:25° to 150℉, (-3° to 65℃)

DT2630B Temp. Overall Range:-40° to 160℉ (-40° to 71℃)

DH2630, RH & T Overall Range:0-100% RH, -40° to 200℉

Transmitted Accuracy:

Temperature:±1.0℉ (±0.55℃)

RH:3% Capacitive, 10-90% @77℉

Indication :LED on Transmit and data link conformation

 :LED on Low battery

A/D resolution:12 bit (4095 counts)

Mounting:Direct to duct w/tabs

Wiring:None

Operating Temperature:14° to 140℉ (-10° to 60℃)

Operating Humidity:0 to 95% RH (non-condensing)

Construction:Polycarbonate Plastic, UL94 V-0

Enclosure Rating:IP54

Dimensions:1.75″H x 3.0″W x 5.0″D, Probe ∅0.25″, (4.44 x 7.92 x 14.6 cm)

Weight:1.2 lb (0.54 kg)

Warranty:1 year

NEXT COLUMN:

Radio Transmitter:

Protocol (Proprietary, ZigBee, EnOcean):Proprietary (ACI), IEEE 802.15.4-2003/2006

 :Data-Link LED confirms receiver reception

Frequency (MHz, GHz):902-928 MHz

Channel Network:1

Modulation (DSSS, FHSS):Direct Sequence Spread Spectrum (DSSS)

Transmit Power (db. and mw):11.2 mW (11 dBm)

Receiver Sensitivity, (db. and mw):-110db

Open Air Range, (Ft, Meters):5,280 ft (1,600m) Open air

 :200’- 500’ (61-152 m) in building

Low Battery Indication, (Yes, No, How):Yes, LED

Transmission time (ms):˜ 20ms

Transmission Interval:75 seconds standard, (Can be factory programmed at 300 sec)

Antenna, (internal, remote):Internal

Channels (max #):One

Device Addresses (max number):100 transmissions per minute

Programming (how):Program cable & laptop (free SW)

Repeater Capable:Yes, (can increase open air range x2)

Compliance (FCC, RoHS, IEEE):FCC ID# T4F061213RSO, RoHS

Certifications




Download Additional Data

document   WT2630 Catalog Page
document   WT2630 Datasheet