Network and Wireless

SST2630



Product Bar End
Product Bar End

SST2630

Meshnet900™ Wireless Remote Temperature Systems SST2630

Meshnet900™ Wireless Remote Temperature Systems

 

The ACI Meshnet900™ SST2630 wireless remote sensor is encapsulated in a 0.25" OD 304 stainless steel probe. The sensor is used typically for a single point of temperature measurement in piping or ductwork. A Data-Link LED is used to confirm the receiver has received the data transmission. This eliminates the need for special wireless installation equipment or tools and allows for quick installation.


Products
Filter:

(Wholesale customers, log in for your special pricing)

QtyModelDescriptionIn StockList PriceInternet Price
OA2630 WIRELS OSA TEMP(-40-160 F)SENS/HUM W/8PLATE SOLAR INFO1,595.471,276.38
OST2630 WIRELS COMPACT OUTSIDE AIR (-40-160 F) NEMA4 INFO912.32729.86
SSH2630A HUMIDITY SENSOR (3%) W/ RUGGEDIZED ENCLOSURE INFO1,236.44989.15
SSH2630B TEMP/HUMID (3%) SENSOR W/ RUGGEDIZED ENCLOSURE INFO1,291.001,032.80
SSH2630C HUMID (2%) SENSOR W/ RUGGEDIZED ENCLOSURE INFO1,377.211,101.77
SSH2630D TEMP/HUMID (2%) SENSOR W/ RUGGEDIZED ENCLOSURE INFO1,473.251,178.60
SST2630A WIRELS REMOTE/STRAP-ON TEMP. SENSORS INFO578.39462.71
SST2630AE WIRELS REMOTE/STRAP-ON TEMP. NEMA4 HOUSING INFO781.37625.10
SST2630B WIRELS REMOTE/STRAP-ON TEMP. SENSORS INFO578.39462.71
SST2630BE WIRELS REMOTE/STRAP-ON TEMP. NEMA4 HOUSING INFO781.37625.10
SST2630C WIRELS REMOTE/STRAP-ON TEMP. SENSORS INFO578.39462.71
SST2630CE WIRELS REMOTE/STRAP-ON TEMP. NEMA4 HOUSING INFO781.37625.10

Accessories

No accessories found
Features
  • Battery included
  • No calibration required
  • No wiring needed
  • Easy to install
  • Battery powered sensors
  • Mesh Network - easy to install and relocate sensors without additional wireless installation tools
  • Sensor Data-Link LED confirms connection with Frontier 2.0 receivers
  • Long battery life (approximately 4 to 5 years)
  • Low battery LED + remote low battery alarm notification
  • Reliable Spread Spectrum technology
Specifications

Device Operation:

Supply Voltage :1 or 2, Lithium 3.0V 1400 mAh

Batteries:Duracell, DL123A, (Included)

Battery Life:4-5 years @75 second interval

Sensor Type :Temperature, 20K-2 thermistor internal

Probe length :Stainless Steel, 1/4″ dia x 2″ length

 :CL2P Cable (Cable length per order)

Transmitted Range Value :

SST2630A :Overall Range, 25° to 125℉, (-3° to 52℃)

SST2630B :Overall Range, 0° to 200℉ (-18° to 93℃)

SST2630C:Overall Range, -40° to 160℉, (-40° to 71℃)

Transmitted Accuracy:

Temperature :±1.0℉ (±0.55℃)

Indication:LED on Transmit and data link conformation

A/D resolution:12 bit (4095 counts)

Mounting :Direct to wall w/tabs

Wiring:None

Operating Temperature:32° to 140℉ (0° to 60℃)

Operating Humidity :5 to 95% RH (non-condensing)

Construction :Polycarbonate (NEMA 4), ABS (NEMA 1)

Enclosure Rating :NEMA 4 (UL 94 5VA), NEMA 1 (UL 94 HB)

Dimensions :1.75″H x 3.00″W x 5.75″D, Probe ∅ 0.25″, (4.44 x 7.92 x 14.6 cm)

Weight :1.2 lb (0.54 kg)

Warranty :1 year

NEXT COLUMN:

Radio Transmitter:

Protocol:Proprietary (ACI), IEEE 802.15.4-2003/2006

 :Data-Link LED confirms receiver reception

Frequency:902-928 MHz

Channel Network :1

Modulation:Direct Sequence Spread Spectrum (DSSS)

Transmit Power:11.2 mW (11 dBm)

Receiver Sensitivity:-110db

Open Air Range:5,280 ft (1,600m) Open air

 :200’- 500’ (61-152 m) in building

Low Battery Indication:Yes, LED

Transmission time :20ms

Transmission Interval :75 seconds standard, (Can be factory programmed at 300 sec)

Antenna:Internal

Channels:One

Device Addresses :100 transmissions per minute

Programming:Program cable & laptop (free SW)

Repeater Capable :Yes, (can increase open air range x2)

Compliance:FCC ID# T4F061213RSO, RoHS

Certifications