Network and Wireless

RT2630 Series



Product Bar End
Product Bar End

RT2630 Series

Meshnet900™ Wireless Universal Input Transmitter Module RT2630 Series

Meshnet900™ Wireless Universal Input Transmitter Module

 

The ACI Meshnet900™ RT2630 wireless remote analog and digital input module accepts a variety of analog and digital control inputs and transmits wirelessly to Meshnet900™ receivers. It can be used for up to 4 analog inputs (0-10V, 4-20mA, thermistor) and 4 dry contact inputs can.


Products
Filter:

(Wholesale customers, log in for your special pricing)

QtyModelDescriptionIn StockList PriceInternet Price
RT2630A-AC REMOTE SENSOR INPUT W/4 DI/4 AI (20KOHM) VAC/BATT INFO728.98583.18
RT2630AE WIRELS REMOTE INPUT W/4 DI/4 AI NEMA4 INFO954.88763.90
RT2630B WIRELS REMOTE SENSOR INPUT W/4 DI/4 AI (0-10VDC) INFO785.73628.58
RT2630BE WIRELS REMOTE INPUT W/ 4 DI/4 AI NEMA4 INFO954.88763.90
RT2630C WIRELS REMOTE SENSOR INPUT W/ 4 DI/4 AI (0-20MA) INFO785.73628.58
RT2630CE WIRELS REMOTE INPUT W/ 4 DI/4 AI NEMA4, 24VAC INFO954.88763.90

Accessories

No accessories found
Features
  • Battery powered (battery included) or 24 VAC powered
  • 4 analog inputs (20K , 0-10VDC or 0-20mA) and 4 digital inputs (relay contact)
  • No calibration required
  • Mesh Network - easy to install and relocate sensors
  • Long battery life (approxiamately 4 to 5 years)
  • Low battery LED + remote low battery alarm
  • Optional 24VAC or 24VDC power
Specifications

Device Operation:

Supply Voltage:

 :-DC 24 VDC (±20%) or Battery (Lithium 3.0V 1400 mAh)

 :-AC 24 VAC (±20%) or Battery (Lithium 3.0V 1400 mAh)

Batteries:Duracell, DL123A, (Included)

Battery Life:4-5 years @75 second intervals

Sensor Type:Four, 2 wire digital inputs (Included on all units below)

RT2630A:Four, 2 wire 20K thermistor inputs (Can share a common)

RT2630B:Four, 2 wire 0-10V inputs (Can share a common)

RT2630C:Four, 2 wire 0-20mA inputs

Transmitted Range Value:Four remote contacts open or closed

RT2630A:Temperature value 0° to 200℉ (-18° to 93℃)

RT2630B:Duplicates full 0-10V analog signal

RT2630C:Duplicates full 0-20MA analog signal

Accuracy:Not Specified

Digital Input:Transmits immediately on change of state activation

Analog Input :Transmits at the normal interval timing

Indication:LED on Transmit and data link conformation

 :LED on Low battery

A/D resolution:12 bit (4095 counts)

Mounting:Direct to wall w/tabs using four #8 screws

Wiring:Terminals for 18 AWG wire

 :16 Sensor terminals and 2 power terminals if used

Operating Temperature:14° to 140℉ (-10° to 60℃)

Operating Humidity:0 to 95% RH (non-condensing)

Construction:Polycarbonate (NEMA 4), ABS (NEMA 1)

Enclosure Rating:NEMA 4 (UL 94 5VA), NEMA 1 (UL 94 HB)

Dimensions :

 :RT2630, NEMA 1 7.3″H x 4.7″W x 2.25″D (18.5 x 11.9 x 5.7 cm)

 :RT2630xE, NEMA 4 6.7″W x 4.8″H x 2.2″D (17.1 x 12.1 x 5.1 cm)

Weight:1.2 lb (0.54 kg)

Warranty:1 year

Radio Transmitter:

Protocol:Proprietary (ACI), IEEE 802.15.4-2003/2006

 :Data-Link LED confirms receiver reception

Frequency:902-928 MHz

Channel Network:1

Modulation:Direct Sequence Spread Spectrum (DSSS)

Transmit Power:11.2 mW (11 dBm)

Receiver Sensitivity:-110db

Open Air Range:5,280 ft (1,600m) Open air

 :200’- 500’ (61-152 m) in building

Low Battery Indication:Yes, LED

Transmission time:4-5 years @ 20ms

Transmission Interval:75 seconds standard, (Can be factory programmed at 300 sec)

Antenna:Internal

Channels:One

Device Addresses:100 transmissions per minute

Programming:Program cable & laptop (free SW)

Repeater Capable:Yes, (can increase open air range x2)

Compliance:FCC ID# T4F061213RSO, RoHS

Certifications