Device Operation:
Supply Voltage:
:RT2602B Battery only, Lithium 3.0V 1400 mAh
:RT2620B Battery only, Lithium 3.0V 1400 mAh
:RT2620A 24 VAC (±20%) or Battery (Lithium 3.0V 1400 mAh)
Batteries :Duracell, DL123A, (Included)
Battery Life:4-5 years @75 second intervals
Sensor Type :Dry Contact Closure
:RT2602 Two, 2 wire digital inputs (Can share a common)
:RT2620 Four, 2 wire digital inputs (Can share a common)
Transmitted Range Value:
:RT2602 Two remote contacts open or closed
:RT2620 Four remote contacts open or closed
Accuracy :Transmits immediately on change of state activation
Indication :LED on Transmit and data link conformation
:LED on Low battery
A/D resolution:12 bit (4095 counts)
Mounting:Direct to wall w/tabs using four #8 screws
Wiring:DI terminals for 18 AWG wire
:RT2602 4 Terminals
:RT2620 8 Terminals
Operating Temperature:14° to 140℉ (-10° to 60℃)
Operating Humidity:0 to 95% RH (non-condensing)
Construction:ABS plastic
Enclosure Rating:NEMA 1 (UL 94 HB)
Dimensions:
:RT2602 5.3″ W x 3.0″H x 4.7″W x 1.4″D, (13.4 x 7.6 x 3.5 cm)
:RT2620 6.7″W x 4.8″H x 2.2″D, (17.1 x 12.1 x 5.1 cm)
Weight:1.2 lb (0.54 kg)
Warranty:1 year
Radio Transmitter:
Protocol:Proprietary (ACI), IEEE 802.15.4-2003/2006
:Data-Link LED confirms receiver reception
Frequency:902-928 MHz
Channel Network:1
Modulation:Direct Sequence Spread Spectrum (DSSS)
Transmit Power:11.2 mW (11 dBm)
Receiver Sensitivity:-110db
Open Air Range:5,280 ft (1,600m) Open air
:200’- 500’ (61-152 m) in building
Low Battery Indication:Yes, LED
Transmission time:20ms
Transmission Interval:75 seconds standard, (Can be factory programmed at 300 sec)
Antenna:Internal
Channels:One
Device Addresses:100 transmissions per minute
Programming:Program cable & laptop (free SW)
Repeater Capable:Yes, (can increase open air range x2)
Compliance:FCC ID# T4F061213RSO, RoHS