Network and Wireless

RM2402D and RM2432D



Product Bar End
Product Bar End

RM2402D and RM2432D

Meshnet900™ Wireless Analog and Digital Receivers RM2402D and RM2432D

Meshnet900™ Wireless Analog and Digital Receivers

 

The ACI RM2402D and RM2432D paired with other Meshnet900™ transmitters to produce hard wired output signals to any control systems or DDC panel. The outputs include 0-10 VDC, 0-5 VDC and dry contact inputs. Different wireless transmitters can be used with each receiver output point.


Products
Filter:

(Wholesale customers, log in for your special pricing)

QtyModelDescriptionIn StockList PriceInternet Price
EX2432D OUTPUT EXT MOD FOR RM2432 W/ 4AO/4DO INFO559.83447.86
RM2402D RECEIVER (COORDINATOR) MODULE - 2 DIGITAL OUTPUT In Stock605.67484.54
RM2432D-K RECEIVER OUTPUT MODULE-4 DOS/4(0-10 OR 0-5VDC) AOS In Stock1,174.23939.38
RM2432DE RECEIVER OUTPUT MODULE - 4 DOS/4 AOS (NEMA4) INFO1,420.871,136.70

Accessories

No accessories found
Features
  • Up to 4 analog outputs (0-10 VDC or 0-5 VDC field selectable) and 4 digital outputs (relay contact) (RM2432D only)
  • Up to 2 digital outputs (RM2402 only)
  • Individual low battery and lost sensor alarm indications (RM2432D only)
  • Common alarm relay output for external indication
  • Adjustable digital capture time (up to 4 hours) for application such as temporary occupancy
  • Mesh Network - easy to install and relocate sensors without additional wireless installation tools
  • Sensor Data-Link LED confirms connection with Frontier 2.0 receivers
  • Reliable Spread Spectrum technology
Specifications

Device Operation:

Supply Voltage :

 :RM2402D 24 VAC (±20%), 300mA

 :RM2432D 24DC 24 VDC (±20%), 300m

Output:

 :RM2402D Two contacts SPST N.O., 1A @24 VAC

 :RM2432D Four contacts SPST N.O., 1A @24 VAC

 :Four 0-5V or 0-10V Analog, 20kO min

 :Low battery or Lost sensor alarm, SPST N.O., 1A @24 VAC

 :(Analog is scaled per the linked transmitter scale)

Accuracy:No degradation of accuracy

Indication:2 LEDs for data link and active operation

 :RM2432D 8 LEDs for Low battery and lost sensor

A/D resolution:12 bit (4095 counts)

Mounting:Direct to wall w/tabs using four #8 screws

Wiring:

 :RM2402D 4 Terminal contatcs (20AWG) & 2 power terminals 18-20 AWG wire

 :RM2432D 18 Sensor terminals & 2 power terminals (20AWG)

Operating Temperature: 32° to 140℉ (0° to 60℃)

Operating Humidity:5 to 95% RH (non-condensing)

Construction:Polycarbonate (NEMA 4), ABS (NEMA 1)

Enclosure Rating: NEMA 4 (UL 94 5VA), NEMA 1 (UL 94 HB)

Dimensions:

 :RM2402, NEMA 1 6.3″W x 4.7″H x 2.4″D, (18.5 x 11.9 x 6.0 cm)

 :RM2432D, NEMA 1 8.9″W x 4.7″H x 2.4″D, (21.0 x 12.0 x 6.0 cm)

 :RM2402DE, NEMA 4 6.7″W x 4.8″H x 2.2″D, (17.1 x 12.1 x 5.5 cm)

 :RM2432DE, NEMA 4 8.7″W x 5.7″H x 3.0″D, (22.1 x 14.6 x 7.5 cm)

Weight:1.2 lb (0.54 kg)

Warranty:1 year

Radio Receiver:

Protocol:Proprietary (ACI), IEEE 802.15.4-2003/2006

 :Data-Link LED confirms receiver reception

Frequency:902-928 MHz

Channel Network:1 of 64 netwrok addresses

Modulation:Direct Sequence Spread Spectrum (DSSS)

Transmit Power:11.2 mW (11 dBm)

Receiver Sensitivity:-110db

Open Air Range:5,280 ft (1,600m) Open air

 :200’ - 500’ (61-152 m) in building

Low Battery Indication:Yes, LED

Transmission time:20ms

Transmission Interval:75 seconds standard, (Can be factory programmed at 300 sec)

Lost Comm. Fail Safe:

 :RM2402D N.O on power fail

 :RM2432D Closes on loss of sensor com or low transmitter battery

Antenna: Internal

Channels:1 of 63 network addresses

Device Addresses:

 :RM2402D 2 individual transmitter addresses

 :RM2432D 8 individual transmitter addresses

Programming:Program cable & laptop (free SW)

Repeater Capable:Yes, (can receive from any channel reapeater)

Compliance:FCC ID# T4F061213RSO, RoHS

Certifications




Download Additional Data

document   Software Configuration
document