Device Operation:
Supply Voltage:24V AC/DC ±15%, @300mA, 50/60Hz
Transmitted Range Value:All outputs are 0-10VDC
:(Latching-Toggles on every button push)
:(Latching-Follows transmitter input on/off)
Output:Alarm contact, 24V @50mA max
:RF-RX20 20, 0-10VDC outputs, 1KΩ impedance min
:RF-RX40 40, 0-10VDC outputs, 1KΩ impedance min
Accuracy:±2% of output range
Indication:LED D603-Node has lost communication (Node Off-Line)
Controls:Reset button
A/D resolution:10 bit resolution, (Pressure is 16 bit)
Mounting:DIN rail Bracket
Wiring:Four terminals for power and alarm
:SMA Antenna connection
:USB 2.0 for configuration set-up
:RF-RX20 40 active (G/V) terminals, All (G) terminals are common
:RF-RX40 80 active (G/V) terminals, All (G) terminals are common
Operating Temperature:14° to 122℉ (-10° to 50℃)
Operating Humidity:0-90% RH non-condensing
Construction:Open board and terminals
Enclosure Rating:DIN Bracket w/o enclosure
Dimensions:8.0″W x 4.2″H x 1.8″D, (20.2 x 10.5 x 4.5 cm)
Weight:1.21 lb (0.55kg)
Warranty:3 year
Radio Transceiver:
Protocol:Proprietary Healing Mesh (Sontay), 128 encripted
Frequency:2.4 GHz w/16 channels automatically selected
Modulation:Direct Sequence Spread Spectrum (DSSS)
Transmit Power:No transmitter
Receiver Sensitivity:-102dB
Transmission Interval:Not Specified
Lost Comm. Fail Safe:Stays in its last commaded stat
Antenna:6″ Stick mounted to board, 360° pattern (included)
:RF-AERIAL Antenna extension CBL. 2m or 5m
Channels:16 channels automatically selected
Device Addresses:50 transmitters per receiver
Programming:USB 2.0, for In field w/ laptop/Free (CMS) SW and USB Cable
Repeater Capable:Yes
Compliance:FCC ID: OA3MRF24J0MA
:IEEE 802.15.4-2006
:CE, RoHs