Network and Wireless

Raptor Protocol Converter



Product Bar End
Product Bar End

Raptor Protocol Converter

RLE Technologies Protocol Converter Raptor Protocol Converter

RLE Technologies Protocol Converter

 

The RLE Raptor Protocol Converter connects directly to equipment and converts the SNMP, BACnet, and Modbus protocols to one or more of these same protocols for integration into a building management system (BMS) or network management system (NMS). The Protocol Converter is ideal for situations where data from monitored equipment is incompatible with the protocols used by the BMS or NMS, such as in cases where legacy monitoring systems are present. The ability of the Protocol Converter to accept up to 1,024 inputs over 32 modules means flexible integration with multiple alarm and management systems with the use of one simple device. In addition, the Dual Port Protocol Converter provides a cost-effective means to connect to multiple trunk lines with two additional Modbus EIA-485 ports.


Products

(Wholesale customers, log in for your special pricing)

QtyModelDescriptionIn StockList PriceInternet Price
FDS-PC PROTOCOL CONVERTER, SINGLE PORT INFO2,174.081,739.26
FDS-PC-DP PROTOCOL CONVERTER, DUAL PORT INFO2,904.312,323.45

Accessories

No accessories found
Features
  • Multiple input and output protocols
  • Monitor up to 1,024 Modbus registers, OIDs, or instances
  • Connect up to 32 units/modules/nodes
  • Connect to multiple trunk lines with Dual Port Protocol Converter
  • Alarm notification through email, SNMP
  • Web configuration
Specifications

Supply Voltage:24 VAC/VDC @ 600mA max, 50/60 Hz

Communication Ports:

Ethernet:10/100BaseT, RJ45 connector; 500VAC RMS isolation

EIA-232: DB9 female connector; 9600 baud; No parity, 8 data bits, 1 stop bit

EIA-485 :1200, 2400, 9600 or 19200 baud (selectable); Parity: none, even or odd, 8 data bits, 1 stop bit

Protocol:

TCP/IP; HTML, TFTP:

SNMPV1:: V2C MIB-2 compliant; NMS Manageable with Get

Modbus (EIA-485):Modbus Master/Slave; RTU mode; Supports Master codes 01, 02, 03, 04; Slave code 03

Modbus TCP/IP:Modbus Master/Slave; TCP/IP transmission protocol

BACNet/IP:ASHRAE STD 135-2004 Annex J; Port 3 on Dual Port Protocol Converter is BACnet MS/TP capable (Slave only)

SMTP (email):Supports Client Authentication (plain and login); compatible with ESMTP Servers

Terminal Emulation (EIA-232):VT100 compatible (for configuration and diagnostics only)

Indicator:

Network:1 Green/Red LED: Link/No Link; 1 Green Active (additional LEDs for Dual Port Protocol Converter)

EIA-485 Status:2 Green Transmit and Receive LEDs (additional LEDs for Dual Port Protocol Converter)

Security Login:

Web Browser Access (Ethernet):1 Web password Read Only; 1 Web password Read/Write

Terminal Emulation Access:None

Protocols In:SNMP, Modbus EIA-485, Modbus TCP/IP, BACnet/IP

Protocols Out:SNMP, Modbus EIA-485, Modbus TCP/IP, BACnet/IP; BACnet MS/TP (Port 3 of Dual Port Protocol Converter only)

Max Number of Units/Modules/Nodes:32

Max Number of Registers/OIDSs/Instances:1024

Operating Temperature:32° to 122℉ (0° to 50℃)

Operating Humidity:5-95% RH non-condensing

Mounting:Desktop or rack mount (brackets included)

Dimensions:9.8″W x 5.3″D x 1.8″H (248 x 135 x 46 mm)

Weight:2.32 lb. (1.05kg)

Approvals:CE; ETL listed: conforms to UL 61010-1, EN 61010-1; certified to CSA C22.2 NO. 61010-1; RoHS compliant

Warranty:1 year

Certifications