Network and Wireless


Product Bar End
Product Bar End


FTT-10 LonWorks Repeaters 110B

FTT-10 LonWorks Repeaters


The 110B Series is a two-channel physical layer repeater for FTT-10 LonWorks networks. Data received on one channel is reconditioned and re-transmitted on the other channel. Each Model 110B effectively doubles the wiring distance and the number of nodes that can be placed on the network. On-board jumpers allow each channel to be terminated independently for bus or free topology. A local 3.5 mm network jack allows a convenient way to connect an installation or diagnostic tool to the network without disconnecting any wires. Three LEDs provide diagnostic information for troubleshooting. A green LED indicates when power is applied. Two red LEDs indicate when data is being received on each of the two local channels.


(Wholesale customers, log in for your special pricing)

QtyModelDescriptionIn StockList PriceInternet Price
110B LONWORKS REPEATER, 2 CHANNELSIn Stock712.98399.27


No accessories found
  • Extends wiring distance of FTT-10 LonWorks Networks
  • Up to 5 repeaters can be daisy chained together to create a multi-segment repeater of up to 10 channels
  • Low cost alternative to routers configured as repeaters
  • All wiring is to removable terminal blocks for ease of service
  • Polarity insensitive AC/DC wide input voltage range
  • Input power has over current and transient voltage suppression
  • Termination for bus and free topology
  • 3.5 mm network jack for local installation tool connection
  • Communication and power indicators to assist in field diagnostics
  • DIN Rail mount enclosure

Supply Voltage:12-36 VDC or 9-26 VAC @ 30 mA typical. Polarity insensitive wiring.

Network Transceiver Type:Two Echelon FTT-10A transceivers at 78 kbps. DC blocking capacitors for Link Power network are installed.

Network Termination:Separate jumpers for each channel support free and bus topology termination.

Multi-Segment Operation:Max of 5 repeaters can be daisy chained to construct a 10-channel repeater hub.

Protection:Input power is fused and transient voltage protected. Fuse automatically resets when fault is removed.

Enclosure Rating:NEMA 1, Material Grey flame retardant Noryl UL94_V0

Operating Temperature:32° to 176℉ (0° to 80℃)

Operating Humidity:0-90% RH non-condensing

Dimensions:3.54″H x 1.42″W x 2.28″D

(90 x 36 x 58 mm):

Mounting:DIN rail mount to 35 mm rail

Weight:0.3 lb (0.14 Kg)

Warranty:1 year

Download Additional Data

document   0110B Data Sheet 0100