Network and Wireless

EasySens Input Modules



Product Bar End
Product Bar End

EasySens Input Modules

EnOcean Input Module EasySens Input Modules

EnOcean Input Module

 

The Thermokon EasySens Input Modules are EnOcean wireless input modules provide information and status to a higher level controller. The module SR65 DI has one digital input for dry contacts by which the switch status can be evaluated. The status of the contact (opened/closed) is transmitted by an EnOcean radio signal to a receiver. The module SR-MI-HS has three inputs for receiving pulses from water, gas, electric or BTU meters with S0 interfaces (DIN 43864). Pulses of every inputs are totaled independently and the total will be transmitted every 5, 10, 100 or 1000 seconds, depending on the settings. In addition, a signal can be generated and transmitted every 10th or every 100th pulse.


Products

(Wholesale customers, log in for your special pricing)

QtyModelDescriptionIn StockList PriceInternet Price
SR-MI-HS-902 ENERGY METER 3X PULSE INPUTS, 902MHZ INFO743.68594.94
SR65-3AI-902 3 X 0-10 VDC INPUT MOD 902MHZ INFO474.16379.33
SR65-DI-902 DIGITAL INPUT MODULE 902MHZ INFO454.40363.52

Accessories

No accessories found
Features
  • EnOcean Wireless
  • Adjustable Transmission Intervals
  • Easy to Setup ″Learn Button″
Specifications

Device Operation:

Supply Voltage:

 :SR65-DI Battery, 3.6V, 1.1Ah, 1/2 AA, Lithium LS14250, Battery life 5+ years @ 100 second intervals

 :SR65-MI 24 VDC @ 66 mA, ±10% (No Battery), 24 VAC @3.2 VA, ±10%

Sensor Type:Dry Contact, .5mA min, <1KO max on closure

 :SR65-DI 1 ON/Off monitored contact (by others)

 :SR65-MI 3 Accumulated pulses from meters (By others)

Transmitted Range Value:

 :SR65-DI Monitored open or closed contact

 :SR65-MI 3 Acumulated values from xx-yy, with rollover

Accuracy:

 :SR65-DI Digital On/Off

 :SR65-MI Digital Pulse, 5 pulses per second

Indication:

Time Interval :(-DI)-Jumpers or (-MI)-Dip Switches

Time Wakeup :(-DI) TW-Jumper, (100 or 1,000 seconds), Measures value

Program Learning:Button

Mounting:

 :SR65-DI Two through mount holes w/internal terminals

 :SR65-MI DIN rail w/open terminals

Wiring:

 :SR65-DI Two input terminals, 22-16 AWG

 :SR65-MI 8-terminals, 22-16 AWG, 1-FME Antenna connector

Operating Temperature:-13° to 149℉ (-25° to 65℃)

Operating Humidity:0 to 75% RH, non-condensing

Construction:ABS Plastic, UL94 V-0

Enclosure Rating:(-DI) NEMA 4 (IP65) Internal, (-MI) NEMA 1 (IP20)

Dimensions:

 :SR65-DI 2.2"H x 3.1"W x 1.8"D (5.8 x 7.8 x 4.5 cm)

Weight :0.57 lb (0.26 kg)

Warranty :2 years

Radio Transmitter:

Protocol:EnOcean

Frequency:902 MHz

Modulation:Direct Sequence Spread Spectrum (DSSS)

Transmit Power:10 mW (10 dBm)

Open Air Range:328 ft (100m)

Low Battery Indication:Yes for the SR65-DI

Transmission time:20ms

Transmission Interval:

 :Can be field set 10, 100 or 1000 seconds

 :SR65-MI Every 5, 10, 100 or 1000 seconds, Field selectable

 :And/Or at pulse count intervals (Off,10,100), Field selectable

Antenna:(-DI) Internal, (-MI) external

Channels:One

Device Addresses:100 transmissions per minute

Programming :Push button in field

EnOcean Equipment Profile:EEP #, Defines payload and control sequence use

 :SR65-DI A5-30-01, Digital Input

 :SR65-MI A5-12-00, Pulse counter

Repeater Capable:Yes, (can increase open air range x2)

Compliance:FCC ID# S3NSRXX, RoHS, CE

Certifications