Network and Wireless

E3X-Rxx-REPTP Series

Product Bar End
Product Bar End

E3X-Rxx-REPTP Series

EnOcean Wireless Repeater E3X-Rxx-REPTP Series

EnOcean Wireless Repeater


The ILLUMRA Repeater works to extend the wireless coverage area of ILLUMRA wireless networks. It receives wireless control signals and retransmits them to distant receivers or other repeaters. The device is capable of one-level and two-level repeating, effectively tripling the coverage distance otherwise achievable without using repeaters. It is easy to install and requires no setup or commissioning. These repeaters communicate with ILLUMRA's E3T-x series of transmitters, E3R-x series of receivers and E3X-x series of transceiver controllers.


(Wholesale customers, log in for your special pricing)

Please call for product availability


No accessories found
  • One-level and two-level repeating
  • Fast, easy installation
  • No setup required
  • No commissioning required

Device Operation:

Supply Voltage:

 :E3X-R24-REPTP 240 VAC, 50/60 Hz

Sensor Type:Not Specified

Transmitted Range Value : Repeats all received transmissions

Accuracy :No degradation of accuracy


Controls :2 buttons through hole

Mounting :1/2″ NPT hub w/ nut

Wiring :2 wire pigtail, 16 AWG (2-PWR)

Operating Temperature :-13° to 140℉ (-25° to 60℃)

Operating Humidity :0 to 95% RH, non-condensing

Construction :ABS Plastic, UL94 V-0


Enclosure Rating :NEMA 1 (IP40)

Dimensions:2.11″H x 1.73″W x 1.09″D, (5.36 x 4.39 x 2.77 cm)

Weight :0.15 lbs (0.07 kg)

Warranty:3 years

Radio Receiver/Transceiver:


Frequency: Classic 315 MHz

Modulation:Direct Sequence Spread Spectrum (DSSS)

Transmit Power:xx mW (yy dBm), power level 1 (selectable)

 :10 mW (10 dBm), power level 2 (selectable)

Receiver Sensitivity:-102 dB

Open Air Range:50-150 ft (45m)

Update Interval :Re-Transmits as signal is received

Antenna:Pig tail

Channels: One

Device Addresses:100 transmissions per minute

Repeater Capable :Yes, (can increase open air range x2)

Compliance :RoHS, CE, UL244A