Network and Wireless

E9X-Rxx-3HOTP Series

Product Bar End
Product Bar End

E9X-Rxx-3HOTP Series

3 Wire EnOcean Wireless Relay Receiver E9X-Rxx-3HOTP Series

3 Wire EnOcean Wireless Relay Receiver


The ILLUMRA E9X-Rxx-3HOTP Series single channel relay receivers allow high voltage circuits to be controlled by ILUMRA wireless switches, remotes, transmitters, and sensors. The line-voltage relays help simplify advanced wireless lighting control.


(Wholesale customers, log in for your special pricing)

Please call for product availability


No accessories found
  • Installs in minutes, programs in seconds
  • Requires no switch leg or traveler wires
  • Compatible with ILLUMRA transmitters
  • Each unit stores up to 25 light switch IDs
  • Error checking on all packet transfers

Device Operation:

Supply Voltage:Power stealing from circuit feed

Sensor Type :Input from up to 30 switch IDs

Outputs :Voltage control output supplied from main power

Accuracy :Digital On/Off

Controls :1 button through hole, (Teach)

Mounting :1/2" NPT hub w/ nut

Wiring :3 wire pigtail, 16 AWG (2-PWR, 1 switch leg)

Operating Temperature :14° to 122℉ (-10° to 50℃)

Operating Humidity :0 to 95% RH, non-condensing

Construction :ABS Plastic, UL2043 plenum

Color :White

Enclosure Rating :NEMA 1 (IP40)

Dimensions :1.73"W x 2.11"H x 1.09"D, (4.39 x 5.36 x 2.77 cm)

Weight :0.3 lbs (0.14 kg)

Warranty :3 years

Radio Receiver:


Frequency :902 MHz, (Classic 315 MHz available on request)

Modulation :Direct Sequence Spread Spectrum (DSSS)

Receiver Sensitivity:-102 dB

Open Air Range:50-150 ft (45m)

Update Interval:Continuious reception to each transmission it's trained too



Device Addresses :100 transmissions per minute

Programming:Push button in field

EnOcean Equipment Profile:EEP #, Defines payload and control sequence use

Repeater Capable :Yes, (can increase open air range x2)

Compliance :(FCC, RoHS, IEEE) RoHS, CE, CSA, UL244A