Network and Wireless

BA/WT-SL Series



Product Bar End
Product Bar End

BA/WT-SL Series

BAPI-Slim - Wireless Temperature Transmitter BA/WT-SL Series

BAPI-Slim - Wireless Temperature Transmitter

 

The BAPI-Slim Wireless Temperature Transmitter is designed to monitor temperature inside refrigerator and freezer cases. The BAPI-Slim mounts on the outside of freezer units and can be mounted either inside or outside of refrigerator units. The unit is available with an internal sensor or an RJ11 jack external sensor. The external sensor's ribbon cable can easily fit between the door seal or through hole with FEP cable without affecting appliance efficiency. The temperature is then transmitted at 30-second intervals to the receiver with a measurement range of -40 to 185˚F (-40 to 85˚C).


Products

(Wholesale customers, log in for your special pricing)

QtyModelDescriptionIn StockList PriceInternet Price
BA/WT-SL-IS WIRELESS TEMP TRANS SLIM INTERNAL SENSOR INFO307.53246.02
BA/WT-SL-RP-FEP10-RJ11 WIRELESS TEMP TRANS SLIM RM PROBE 10FT FEP, RJ11 INFO429.34343.47
BA/WT-SL-RP-FEP5-RJ11 WIRELESS TEMP TRANS SLIM RM PROBE 5FT FEP, RJ11 INFO423.89339.11
BA/WT-SL-RP-R10-RJ11 WIRELESS TEMP TRANS SLIM RM PROBE 10FT RIBBON RJ11 In Stock340.07272.06
BA/WT-SL-RP-R5-RJ11 WIRELESS TEMP TRANS SLIM REMOTE PROBE 5FT RIBBON In Stock336.72269.38
BA/WT-SL-TB-FEP5-RJ11 WIRELESS TEMP TRANS SLIM THERMOBUFFER 5FT FEP RJ11 INFO436.60349.28
BA/WT-SL-TB-R10-RJ11 WIRELESS TEMP TRANS THERMOBUFFER 10FT RIBBON, RJ11 INFO437.73350.18
BA/WT-SL-TB-R5-RJ11 WIRELESS TEMP TRANS THERMOBUFFER 5FT RIBBON, RJ11 INFO434.35347.48

Accessories

No accessories found
Features
  • Wireless 100 foot open field range
  • Built in or remote temperature sensor
  • Four year battery life
  • Slim unobtrusive design is easy to mount
Specifications

Device Operation:

Supply Voltage : 3.6 VDC, Battery power only

Batteries :One 1/2 AA 3.6V lithium batteries (Included)

Battery Life :˜ 4 years @20 second intervals

Sensor Type :Temperature, 10K-2 thermistor

-IS :Built-in Temp sensor

-RP :1.75″L x 1/4″dia, SS remote probe

-TB :1″ Thermobuffer

-X :Internal RJ11 jack no sensor (order sensor separately)

Transmitted Range Value :-40° to 185℉ (-40° to 85℃)

Accuracy : Thermistor, 10K type 2, ±1.0℉ (±0.55℃)

Indication: LED on Transmit

A/D resolution :10 bit (1024 counts)

Mounting :Two rear key slots or mounting tap

Wiring :None or RJ11 plug per order

Operating Temperature :-22° to 122℉ (-30° to 50℃),

SS External probe: -40° to 185℉ (-40° to 85℃)

Operating Humidity :0 to 95% RH, Non-condensing

Construction :ABS Plastic, UL94 V-0

Enclosure Rating : Indoor, NEMA 1

Dimensions : 4.1″H x1.3″W x 1.2″D, (10.4 x 3.4 x 2.9 cm)

Weight: 1.0 lb (0.45 kg)

Warranty:2 year (Any temp only transmitter and universal is:........ FCC ID# T4F060811TEMP)

NEXT COLUMN NEXT COLUMN NEXT COLUMN NEXT COLUMN:

Radio Transmitter:

Protocol (Proprietary, ZigBee, EnOcean) : Proprietary (Point Six)

Frequency (MHz, GHz) :418 MHz

Modulation (DSSS, FHSS) :Frequency Modulation

Transmit Power (db. and mw) : 1mW ( 0 ㏈m)

Receiver Sensitivity, (db. and mw) : N/A

Open Air Range, (Ft, Meters):100 ft (30m)

Low Battery Indication, (Yes, No, How):None

Transmission time (ms):˜ 20ms

Transmission Interval:20 seconds standard, (Can be factory programmed 10-300 s)

Antenna (internal, remote):Internal

Channels (max #):One

Device Addresses (max number):100 transmissions per minute

Programming (how):Push button in field

Repeater Capable:Yes, (can increase open air range x10)

Compliance (FCC, RoHS, IEEE):RoHS,

Certifications