Network and Wireless

BA/WAI Series, BA/WDI, BA/WTS



Product Bar End
Product Bar End

BA/WAI Series, BA/WDI, BA/WTS

 BAPI Wireless Universal Transmitters BA/WAI Series, BA/WDI, BA/WTS

BAPI Wireless Universal Transmitters

 

The BAPI BA/W Series wireless universal input transmitters are designed to monitor 0-5VDC, 0-10VDC or 4-20 mA signals and transmit that analog value to a receiver. The digital input version monitors any dry contact status input and transmits that On/Off status to the receiver. The thermistor temperature input version takes any 10K Type 2 thermistor sensor and transmits it to any BAPI receiver. All models transmit their data every 10-17 seconds. The units are battery operated and only require wiring from the remote input sensor.


Products
Filter:

(Wholesale customers, log in for your special pricing)

QtyModelDescriptionIn StockList PriceInternet Price
BA/COM-AO-EZ 4-20MA, CURRENT OUTPUT MODULE INFO187.06149.65
BA/ROM-102-EZ THERMISTOR 10K-2 RESISTANCE OUTPUT MODULE INFO179.58143.66
BA/ROM-103-EZ THERMISTOR 10K-3 RESISTANCE OUTPUT MODULE In Stock174.93139.94
BA/RYOL-NC-EZ RELAY OUTPUT, LATCHING DEFAULT TO NORMALLY CLOSED INFO187.06149.65
BA/VOM-05-AO-EZ 0-5VDC, VOLTAGE OUTPUT MODULE INFO187.06149.65
BA/VOM-10-AO-EZ 0-10VDC, VOLTAGE OUTPUT MODULE  INFO187.06149.65
BA/WAI-05 WIRELESS 0-5VDC ANALOG INPUT TRANSMITTER, 418MHZ  INFO385.89308.71
BA/WAI-10 WIRELESS 0-10VDC ANALOG INPUT TRANSMITTER, 418MHZ INFO385.89308.71
BA/WAI-420 WIRELESS 4-20MA ANALOG INPUT TRANSMITTER, 418MHZ INFO385.89308.71
BA/WDI WIRELESS DIGITAL INPUT TRANSMITTER, 418MHZ INFO371.99297.59
BA/WTS WIRELESS 10K-2 THERMISTOR INPUT TRANS, 418MHZ INFO385.89308.71

Accessories

No accessories found
Features
  • Two Year Battery Powered with Replaceable Battery
  • 0-5, 0-10 and 4-20mA Analog Input Models
  • Digital Input (dry contact) Model
  • Thermistor Temperature Input Model
  • 100' open air range, 1,000' range with a Repeater
  • Transmission Interval from 20 seconds
  • Easy Two-Wire Termination and Easy Setup Mode
Specifications

Device Operation:

Supply Voltage:3.6 VDC, Battery power only

 :Batteries Two AA 3.6V lithium batteries (Included)

 :Battery Life 8 years @20 second intervals

Sensor Type:Order sensor separately

 :WTS Any Temperature, 10K-2 thermistor

 :WDI Dry Contact, 250Ω open (Held for 20 seconds)

 :WAI-(05,10) Voltage input (0-5V or 0-10V), >30KΩ

 :WAI-420 Current input (4-20mA), 100Ω Imp.

Transmitted Range Value :

 :Temperature -40° to 185℉ (-40° to 85℃)

 :Digital Input Open and Closed

 :WAI-(05,10) Mimics input 0-5V or 0-10V

 :WAI-420 Mimics input 4-20mA

Output:Output modules used with these transmitters (BA/RCV req.)

 :WTS BA/(ROM,VOM,COM) (temperature range)

 :WDI BA/RYOL-NO-EZ, (Output Mimics Input)

 :WAI-(05,10) BA/VOM-(05,10), (Output Mimics Input)

 :WAI-420 BA/COM, VOM, (Output Mimics Input)

Accuracy:Thermistor, 10K type 2, ±0.5℉ (±0.32℃)

 :Analog limited to A/D resolution

Indication:LED on Transmit

A/D resolution:10 bit (1024 counts)

Mounting:Four corner mounting feet

Wiring:Two input terminals, 22-16 AWG

Operating Temperature:32° to 140℉ (0° to 60℃)

Operating Humidity:5 to 95% RH, Non-condensing

Construction:UV-Resistant Polycarbonate, UL94 V-0

Enclosure Rating:IP-66

Dimensions:4.1″H x 5.0″W x 2.5″D (10.4 x 12.7 x 6.4 cm)

Weight:1.0 lb (0.45 kg)

Warranty:2 year

Radio Transmitter:

Protocol:Proprietary (Point Six)

Frequency:418 MHz

Modulation:Frequency Modulation

Transmit Power:1mW ( 0 dBm)

Open Air Range:100 ft (30m)

Transmission time:20ms

Transmission Interval:20 seconds standard, (Can be factory programmed 10-300 s)

Antenna:Internal

Channels:One

Device Addresses:100 transmitters within 100'

Programming:Push button in field

Repeater Capable:Yes, (can increase open air range x10)

Compliance:RoHS, FCC ID# T4F060811TEMP

Certifications