Network and Wireless

AIC900E



Product Bar End
Product Bar End

AIC900E

Wireless Ethernet transceivers AIC900E

Wireless Ethernet transceivers

 

The AIC Wireless AIC900E-K Series of wireless ethernet devices are readily available for any building automation, control or monitoring application. The devices are a reliable lowcost alternative to long runs of communication cable to previously hard to reach locations, due to a lack of existing communications architecture. The AIC900E-K Series wireless devices are shipped ready to install, with a true plug-and-play set-up requiring no special programming or network management tools.


Products
Filter:

(Wholesale customers, log in for your special pricing)

QtyModelDescriptionIn StockList PriceInternet Price
AI-XFMR 120 VAC TO 24 VAC RECEP WALL MOUNTED POWER ADAPTER In Stock113.4890.78
AIC900-E-F ETHERNET TRANSCEIVER 900MHZ, FIPS140.2 INFO2,679.012,143.21

Accessories

No accessories found
Features
  • 902-928 MHz frequency provides excellent non-line-of-sight performance to penetrate foliage, building walls, and floors
  • Highest Quality of Service (QoS) available-synchronous point-to-multipoint protocol enables extremely low data latency and jitter
  • 128 bit encrypted payload protection provides secure data delivery
  • Simple plug-and-play setup with minimal configuration required
  • Flexible input power, 12-24 VAC/DC
  • Up to 40 mile range
Specifications

Device Operation:

Supply Voltage:24 VAC/VDC @100ma (Isolated power required)

Comm Input/Output:Any Ethernet signal into RJ45

Protocols:Ethernet, 10/100 Base T

Default IP:192.168.17.17, presents splash screen

Pass Word: ″password″ [enter] to display radio stats and info

Indication:Dedicated LED and 9 segment display

Display:2 digit channel indication (01-12)

Mounting:DIN rail

Wiring :

Power:2 plug-in terminals

Comm.:RJ45

Antenna :RPSMA female

Operating Temperature:-4° to 158℉ (-20° to 70℃)

Operating Humidity:10 to 90% RH (non-condensing)

Construction:Aluminum case w/DIN rail clip

Enclosure Rating:NEMA 1

Dimensions:4.30″H x 1.75″W x 3.35″D, (10.9 x 8.5 x 4.45 cm)

Weight:0.65 lb (0.28 kg)

Warranty:1 Year

Next column Next column:

Radio:

Protocol (Proprietary, ZigBee, EnOcean):Proprietary

Frequency (MHz, GHz):902-928 MHz (12 channel selectable), 128 bit encription

Modulation (DSSS, FHSS):Direct Sequence Spread Spectrum - (DSSS)

Transmit Power (db. and mw):21 dBm (121mW)

Receiver Sensitivity, (db. and mw):-97 dBm, (-112 dBm with 15 dBi antenna)

Open Air Range, (Ft, Meters):See antenna selection table (1300’ to 40 miles)

 : 20 feet separation min. XMTR to RCVR

RF Transmission time:1.536 Mb/s

Data Throughput:935 Kb/s

Server/Clients:Up to 16 Clients per Server, (Best results with 1 to 1)

Antenna, (internal, remote):Remote (order separately)

Channels (max #) :12 channels fixed or auto selectable

Device Addresses (max number):17, however 2- (1 to 1) works best

Programming (how):Direct to laptop

Repeater Capable:Yes, Each unit can serve as a repeater

Compliance (FCC, RoHS, IEEE):FCC ID: R4N-AW900M, IC:5303AAW900M, RoHS

Certifications