Lighting Controls

RR-7, RR-9



Product Bar End
Product Bar End

RR-7, RR-9

GE Lighting Relays RR-7, RR-9

GE Lighting Relays

 

The GE Model RR-7 and RR-9 lighting relays are mechanical latching-type units designed for building automation systems. Each relay requires only momentary 24 volt AC switch circuit pulses to open or close line voltage circuits. All GE low voltage relays may be used to full-rated capacity for tungsten filament, ballast, or resistive loads. The Model RR-9 lighting relay includes an auxiliary contact on the low voltage side for status indication.


Products
Filter:

(Wholesale customers, log in for your special pricing)

QtyModelDescriptionIn StockList PriceInternet Price
RR-7 SPST LIGHTING CONTACTOR In Stock114.2691.41
RR-7-B GE LIGHTING RELAY W/BANANA PLG In Stock126.95101.56
RR-7-SYS SPST LIGHTING CONTACTOR, CUSTOM WITH 6 FT LEAD INFO153.88123.10
RR-7-T G.E. LIGHTING RELAY WITH CONNECTOR In Stock125.82100.66
RR-9 2-SPST LIGHTING CONTACTOR In Stock177.62142.10
RR-9-B RR-9 LIGHTING RELAY WITH 5 PIN BANANA PLUG In Stock193.65154.92
RR-BRACKET-4 RR-7/RR-9 4-HOLE BRACKET In Stock17.9414.35

Accessories

No accessories found
Features
  • Latching relays
  • low voltage input 24 VAC/VDC
  • High load
Specifications

Supply Voltage:21-30 VAC (class 2) momentary pulse

 :30-38 VDC momentary Pulse

Power Output:None

Relay Type:SPST, Mechcanically latching,

 :dry contact

Relay Rating:

 :Resistive 30A @ 277 VAC

 :Ballast 20A @ 277 VAC

 :Tungsten 20A @ 125VAC,

 :Fan HP 1/2HP @ 125/277 VAC

Status Contact:RR-9 only, 24V AC, @1A (YEL/YEL)

Coil Ratings:3 wire split coil

 :Center, (BLU) Common

 :ON, (RED) 50 ms Pulse, Nominal 24 V AC/DC

 :OFF, (BLK) 50 ms Pulse, Nominal 24 V AC/DC

 :Coil impedance 75-85Ω AC, 55-60Ω DC

 :Coil Inrush Current 325 mA @ 24 VAC, 450 mA @ 35 VDC

Cycle Endurance:100K cycles no load,

 :50K cycles full load

Visual Indication:None

Short Circuit Current (SCCR):10,000 A

Operating Temperature:32° to 140℉ (0° to 60℃)

Operating Humidity:10% to 90% RH noncondensing

Wiring Terminations:3 or 5 Control wires - 6″, 20 AWG

 :Contacts- 2 Screw clamp for

 :10-14 AWG

Mounting:1/2″ male knockout

Dimensions:1.5W x 2.5L x 1.7D

 :(3.8 x 6.4 x 4.3 cm) See diagram

Weight:0.3 lb (0.12 Kg)

Approvals:UL File # E18830, CSA certified

Warranty:1 year

Certifications




Download Additional Data

document   RR-7, RR-9 Catalog Page