Lighting Controls

ELCU-100



Product Bar End
Product Bar End

ELCU-100

WattStopper Emergency Lighting Control ELCU-100

WattStopper Emergency Lighting Control

 

Watt Stopper/Legrand's emergency lighting control unit ELCU-100 is a self-contained, reliable, easy-to-install device. The ELCU provides all required functionality to allow any standard lighting control device to control emergency lighting in conjunction with normal lighting in any area within a building.


Products
Filter:

(Wholesale customers, log in for your special pricing)

QtyModelDescriptionIn StockList PriceInternet Price
ELCU-100 EMERGENCY LIGHTING CONTROLLER INFO240.73192.58
EMTS-100 REMOTE TEST SWITCH, 24 VDC, NRMLY CLSD CNTCT INFO86.5169.21

Accessories

No accessories found
Features
  • Eliminates energy waste caused by ″always ON″ emergency lighting
  • Integral push-to-test button activates emergency mode for a true test condition
  • Connects to remote test switch or other input to activate emergency ON from a remote location
  • Operates as a control device or as a shunt
  • Senses local single circuit power failure
  • Zero-crossing switching relay technology
  • LED indication for emergency and normal power
  • Half-second delayed ON positively identifies emergency
  • Provides absolute fail-to-on emergency lighting
Specifications

Supply Voltage: 120/277 VAC, 60 Hz, xx VA

 : Auto voltage detect

Power Output: 24 VDC for Emergency contact DI

Contact Type: SPST-N.C., Zero crossover switching

Contact Rating:

 :Ballast 10A @ 120 VAC; 10A @ 277 VAC

 :Tungsten 2A @ 120 VAC maximum load

 :Fan HP 1HP @ 120 VAC maximum load

Status Contact:None

Manual Override:Push-to-test button on unit

Remote Activation:"DI" for Emergency activation (Test, Fire Alm, Sec Alm)

 : "DI" for Norm/Emrgcy activation (Wall swch, Motion, Central light CTRL)

Coil Ratings: Electrically held emergency contactor coil

 :Energize Greater than 80% of supply voltage (per order)

 :Drop-out Less than 80% of supply voltage (per order)

Cycle Endurance:15M cycles

Visual Indication:3-LEDs (Remote activation, Norm PWR, Emgcy PWR)

Short Circuit Current (SCCR):

 : Not Specified

Operating Temperature:32° to 122℉ (0°to 50℃)

Operating Humidity:5% to 95% RH noncondensing

Wiring Terminations:8 terminals for 14 -10 AWG

Mounting: Surface or DIN rail

Enclosure Rating:NEMA 1, Fire rated V-0, 80℃

Dimensions: 2.78″H x 3.44″W x 2.63″D, (7.1 x 8.7 x 6.7 cm)

Weight: 1.0 lb (0.45 kg)

Approvals: UL 924 listed, file #E302768

 : Meets NFPA, OSHA, and NEC safety codes

Warranty: 5 years

Certifications