Supply Voltage:10 VDC (supplied by dimming ballast)
:
:Sink up to 25 mA
Analog Output:0 to 10 VDC Sinking to ballast
:Compatible with T8 and T5 Electronic Dimming Ballast
Output Impedance :Up to 50 dimming ballasts
Sensor type:Blue-enhanced photo-diode
Accuracy:
:Overall ±1% at 70°F (21°C)
:Temperature 1%, ±10%
:Linearity ±0.5%
:Repeatability ±12%
Range Adjust:Setpoint range from 10 to 140 fc
:Control type Reverse Acting
:Setpoint Adjust 25 turn POT
Response Time Adjust:Standard- 20 seconds
:10 seconds if WHT-GRN wire is cut
Protective Lens:Clear Fresnel lens, 60° angle
Operating Temperature:-13° to 140°F (-25° to 60°C)
Operating Humidity:10% to 95% Non-condensing
Wiring Terminations:4, 18 AWG Pigtails
:
:Signal Out Violet (input PWR), Grey (Sinking signal)
:Sensitivity Adj. WHT to GRN= 20sec, Wht cut GRN= 10 sec
Mounting:Smooth back for ceiling down mounting w/double stick tape
:Note: Do not face the lamps under control
Enclosure Rating:NEMA 1, Indoor
Dimensions:1.23" H x 2" Dia. (3.12 x 5.08 cm), Lens = 1.29" Dia. (3.28 cm)
Approvals:NEC Class 2, California Title 24, RoHS, UL916
Warranty:2 years