Hazardous Locations

MA8, MC6/7, MP6/7 Series



Product Bar End
Product Bar End

MA8, MC6/7, MP6/7 Series

Schneider Electric Explosion Proof Actuator Enclosure (for Valves and Dampers) MA8, MC6/7, MP6/7 Series

Schneider Electric Explosion Proof Actuator Enclosure (for Valves and Dampers)

 

The Schneider Electric MA8, MC6/7, and MP6/7 Series explosion proof actuator enclosures are designed for installation in a hazardous environment. Each of these actuators are factory assembled to order. The enclosure is a cast aluminum housing and bolted cover with explosion proof ratings for Class I, Division 1, Groups C, D and Class II, Division 1, Groups E, F, G. They are for use with any damper with appropriate linkage and with Schneider Electric globe valve sizes 1/2" through 2", two- or three-way.


Products

(Wholesale customers, log in for your special pricing)

QtyModelDescriptionIn StockList PriceInternet Price
AV-291 HAZ LOC LINKAGE 1/2 TO 2 150 INLB INFO852.48681.98
AV-293 HAZ LOC LINKAGE 2-1/2 - 4 150 INLB INFO830.64664.51
CPX9301 6 TO 9 VDC FIXED ACT DRIVE KIT HAZARDOUS LOC INFO5,038.454,030.76
CPX9301456 0 TO 10 VDC FIXED ACT DRIVE KIT HAZARDOUS LOC INFO4,911.143,928.91
CPX9302 4 TO 20 MA FIXED ACT DRIVE KIT HAZARDOUS LOC INFO5,038.454,030.76
MA8-318-500 XP HAZ LOC 2 WIRE 2 POS SR 24V END SW INFO5,686.074,548.86
MP1212 PANEL FOR EJB12126 INFO265.64212.51
MP6-361 XP ACTUATOR-HAZ. LOC. ENCL. INFO7,730.266,184.21

Accessories

No accessories found
Features
  • Class I, Division 1, Groups C, D; Class II, Division 1, Groups E, F, G
  • Full range of approved actuators
  • Approved for valves or dampers
  • Stem position indicator
Specifications

Supply Voltage:24VAC or 12VAC (See ordering)

Control Signal:(See ordering)

Conduit Opening:Two, 3/4" NPT

Assembly:Factory only

Materials Of Construction:Cast aluminum, bolted cover enclosure

Area:Explosionproof Class I, Division 1, Groups C, D; Class II, Division 1, Groups E, F, G

Step Position:Red Dial Pointer

Dimensions:

Actuators (only):(not to exceed) 9″H x 8.25″W x 11″D (22.9 x 21 x 28 cm)

Drive Shaft: 1/2" dia I1.27 cm), 0.93" L (2.38 cm)

Weight: varies per model

Approvals:UL (actuator only), CSA (assembly)

Warranty:2 years

Certifications