Gas and Specialty Sensors

T5100 Series



Product Bar End
Product Bar End

T5100 Series

Telaire Wall Mount CO2 Transmitter T5100 Series

Telaire Wall Mount CO2 Transmitter

 

The Telaire/Amphenol Advanced Sensors T5100 Series Wall Mount CO2 Transmitter offers low cost, high performance CO2 transmitters for the building controls market. It works seamlessly with building automation systems, and allows you to simply and effectively control fresh air into a ventilated to regulated standards, providing immediate energy savings. Kele is the leading supplier of building automation products. When you need the right product, right now, count on Kele.


Products

(Wholesale customers, log in for your special pricing)

QtyModelDescriptionIn StockList PriceInternet Price
T5100 CO2 SPACE SENSOR SELECTABLE 4-20 MA/0-5/10V OP INFO0.000.00
T5100-GN-I CO2 SPACE SENSOR 4-20MA ANALOG OUTPUT NO LOGO INFO351.00280.80
T5100-GN-LED CO2 WALL LED NO LOGO INFO539.00431.20
T5100-GN-V CO2 SPACE SENSOR 0-10VDC ANALOG OUTPUT NO LOGO INFO351.00280.80
T5100-I CO2 SPACE SENSOR 4-20MA ANALOG OUTPUT In Stock351.00280.80
T5100-LED CO2 WALL LED INFO539.00431.20
T5100-V CO2 SPACE SENSOR 0-10VDC ANALOG OUTPUT In Stock351.00280.80

Accessories

No accessories found
Features
  • Patented, Absorption Infrared Gas sensing engine provides high accuracy in a compact low cost package
  • Patented ABC Logic™ self-calibration system eliminates the need for manual calibration in most applications
  • Lifetime CO2 calibration guarantee when using ABC Logic™
  • Mounting plate with two-piece terminal blocks provide quick, easy wiring
  • Gas permeable, water resistant CO2 diffusion filter prevents particulate and water contamination of the sensor
  • Locking screw secures cover and sensor to the mounting bracket for tamper resistance
  • Sensors are shipped factory calibrated
  • Modern enclosure
  • Low cost
  • Reliable (20 years of low-cost infrared sensor manufacturing)
  • Available output options: Voltage 0-10V or 0-5V (jumper selectable) or current 4-20 mA
  • UIP software compatible for customizations
  • CE, RoHS, REACH and WEEE compliant
  • Lifetime calibration warranty
  • Two enclosure sizes for regional acceptance
Specifications

Supply Voltage:18 to 30 VAC RMS, 50/60 Hz or 18 to 42 VDC, polarity protected.

Signal Output:T5100-V : 0 to 5V or 0 to 10V Field Configurable (100 OHM output impedance)

 :T5100-I : 4 to 20mA (RL maximum 500 OHM)

 :T5100-LED : 0 to 5V, 0 to 10V, 4-20mA Field Configurable (100 OHM output impedance)/ Or 4 to 20 mA (RL maximum 500 OHM)

Power Consumption:Typical 0.7 W at nominal voltage of 24V AC RMS

Signal Update:Every 5 seconds

Accuracy:±30 ppm or 3% of the reading shown, whichever is higher* (*C02 accuracy statement excludes standard gas used for calibration that has an accuracy of 2%. In addition, there is a potential digital to analog error of up to 2%.

Stability:<2% of FS over life of sensor (15 years)

Temperature Dependence:0.2% FS per ℃ (±0.11% per ℉)

Measurement Range:0 to 2000 ppm

Sensing Method:Non-dispersive infrared (NDIR) absorption, Gold-plated optics, Patented ABC Logic self calibration algorithm

Calibration Interval:None, uses ABC (Automatic Background Calibration)

Warm Up Time:< two minutes (operational); 10 minutes to achieve maximum accuracy

Pressure Dependence:0.135% of reading per mmHg

Operating Humidity:0 to 95% relative humidity, non-condensing

Operating Temperature:0 ℃ to 50 ℃ (32 ℉ to 122 ℉)

Storage Temperature:-40 ℉ to 158℉ (-40℃ to 70℃)

Dimensions:H x W x D: 4.58 in x 3.20 x 1.01 in (116.40 x 81.40x25.69 mm)

Weight:0.5 lb

Approvals:CE, RoHS, REACH and WEEE compliant

Warranty:24 months on mechanical defects, Calibration - lifetime warranty (ABC Logic on.)

Certifications