Gas and Specialty Sensors

KCOP Series



Product Bar End
Product Bar End

KCOP Series

Kele Carbon Monoxide Detectors KCOP Series

Kele Carbon Monoxide Detectors

 

The Kele KCOP Series Carbon Monoxide Detectors are designed to detect CO and monitor CO levels in parking garages, loading docks, factories, warehouses, transportation terminals and more. Designed for use in Building Automation Systems, BAS, and HVAC systems, these carbon dioxide monitoring units are available with 4-20 mA output or dual relay output for designated warning and alarm CO levels. Each CO detector features a tri-color LED which illuminates green to indicate the unit is powered and functioning properly. On the relay output models, the LED will illuminate amber and red for warning and alarm status. A red LED indicates that the carbon dioxide sensor needs to be replaced. The microprocessor-based electronics are housed in a rugged, steel enclosure with hinged- or screw-covers. A low-temperature option is available for colder climates. When properly installed and maintained, KCOP Carbon Monoxide Detectors can be used as part of a control system to help prevent the formation of a hazardous environment. For more information on the proper application and use of this product please read "Environmental Safety Devices" in our technical reference section.


Products
Filter:

(Wholesale customers, log in for your special pricing)

QtyModelDescriptionIn StockList PriceInternet Price
CO-SR REPLACEMENT SENSOR FOR KCOP SERIESIn Stock215.00120.40
KCOP-CAL CALIBRATION KIT FOR KCOP SERIESINFO456.00255.36
KCOP-A-H CO DETECTOR ANALOG HINGE COVERIn Stock430.00240.80
KCOP-A-H-LT CO DETECTOR ANALOG HINGE LOW TEMPIn Stock486.00272.16
KCOP-A-S CO DETECTOR ANALOG SCREW COVERIn Stock435.00243.60
KCOP-A-S-LT CO DETECTOR ANALOG SCREW COVER LOW TEMPIn Stock491.00274.96
KCOPCALIBRATCAP CALIBRATION CAP TUBING ASSBY KIT FOR KCOP SERIESIn Stock81.0045.36
KCOP-R-H-10PPM CO DETECTOR RELAY HINGE 10PPMIn Stock428.00239.68
KCOP-R-H-25PPM CO DETECTOR RELAY HINGE 25PPMIn Stock428.00239.68
KCOP-R-H-50PPM CO DETECTOR RELAY HINGE 50PPMINFO428.00239.68
KCOP-R-H-LT-10PPM CO DETECTOR RELAY HINGE 10PPM LOW TEMPINFO484.00271.04
KCOP-R-H-LT-25PPM CO DETECTOR RELAY HINGE 25PPM LOW TEMPINFO484.00271.04
KCOP-R-H-LT-50PPM CO DETECTOR RELAY HINGE 50PPM LOW TEMPINFO484.00271.04
KCOP-R-S-10PPM CO DETECTOR RELAY SCREW COVER 10PPMINFO433.00242.48
KCOP-R-S-25PPM CO DETECTOR RELAY SCREW COVER 25PPMIn Stock433.00242.48
KCOP-R-S-50PPM CO DETECTOR RELAY SCREW COVER 50PPMIn Stock433.00242.48
KCOP-R-S-LT-10PPM CO DETECTOR RELAY SCREW COVER 10PPM LOW TEMPINFO489.00273.84
KCOP-R-S-LT-25PPM CO DETECTOR RELAY SCREW COVER 25PPM LOW TEMPIn Stock489.00273.84
KCOP-R-S-LT-50PPM CO DETECTOR RELAY SCREW COVER 50PPM LOW TEMPINFO489.00273.84

Accessories

No accessories found
Features
  • LED power indication
  • 4-20 mA or dual relay output
  • Replaceable sensor
  • Sensor end of life indication
  • Jumper selectable warning/alarm levels (KCOP-R)
  • Heavy-duty enclosures with hinge- or screw-cover
  • Low-temperature option available -22℉ (-30℃)
  • Temperature compensated
Specifications

Supply Voltage:

KCOP:20-30 VAC @ 5 VA or 24 VDC @ 200 mA, 50/60 Hz

LT Option:20-30 VAC @ 26 VA or 24 VDC @ 1.1 A, 50/60 Hz

Accuracy:

KCOP:±2.5% full scale

LT Option: ±4% full scale

Signal Output:

KCOP-R:Two SPDT relay contacts, 240 VAC, 2A resistive

KCOP-A: 4-20 mA @ 600Ω

Measurement Range:0-200 ppm

Sensing Technology:Electrochemical

Calibration:Recalibrate with 25 ppm CO gas

Visual Indication:Status Green: Power on, microprocessor operating properly; Yellow: Warning; Red: Alarm

Warm Up Time:Under 15 minutes

Response Time:

KCOP (all):30 Seconds to warning

KCOP-R:13 minutes to alarm

Sensing Technology:Electrochemical

Sensor Life Expectancy:Approximately 5 years

Relay Setpoints:Warning/alarm: 10/20 ppm, 25/50 ppm or 50/100 ppm, jumper selectable, (KCOP-R only)(5-10 ppm DIF)

Operating Temperature:32° to 122°F (0° to 50°C)

 :(LT option) -22° to 122°F (-30° to 50°C)

Operating Humidity:5% to 99% noncondensing

Dimensions:6.50"H x 6.0"L x 2.13"D (16.5 x 15.2 x 5.4 cm)

Weight:

KCOP-A:3.5 lb (1.6 kg)

KCOP-R:4.0 lb (1.8 kg)

Warranty:1 year

Certifications


Download Additional Data

document   KCOP Series Catalog Page
document   KCOP Installation Manual