Gas and Specialty Sensors

KCO Series



Product Bar End
Product Bar End

KCO Series

Kele Carbon Monoxide Sensor KCO Series

Kele Carbon Monoxide Sensor

 

The Kele KCO Series carbon monoxide sensors are available in analog or relay versions for building automation systems, BAS. The CO detectors are encased in heavy-duty steel housing. Each CO detector uses low-temperature components that are ideal for open parking garages in cold climates. When properly installed and maintained, The KCO Series Carbon Monoxide Sensor can be used as part of a control system to help prevent the formation of a hazardous environment. For more information on the proper application and use of this product please read "Environmental Safety Devices" in our technical reference section.


Products
Filter:

(Wholesale customers, log in for your special pricing)

QtyModelDescriptionIn StockList PriceInternet Price
CMD-CALHOSE-KIT KCO CALIBRATION FITTING INFO73.0058.40
KCO-A-H CO SENSOR HINGED BOX 4/20MA OUTPUT In Stock650.00520.00
KCO-A-H-LT CO SENSOR HINGED BOX 4/20 MA OUTPUT LOW TEMP In Stock731.00584.80
KCO-R-H-50PPM CO SENSOR HINGED BOX RELAY OUTPUT In Stock566.00452.80
KCO-R-H-LT-50PPM CO SENSOR HINGED BOX RELAY OUTPUT LOW TEMP In Stock731.00584.80

Accessories

No accessories found
Features
  • Two-stage alarming (KCO-R)
  • 0-200 ppm 4-20 mA output (KCO-A)
  • Microprocessor controlled recalibration (KCO-A)
  • Heavy-duty enclosures
  • Operating temperature down to -4ºF(-20ºC)
  • Low-temperature option available -20ºF (-29ºC)
  • Temperature and humidity compensated
Specifications

Supply Voltage:

KCO-A:24 VAC @ 5 VA ±20% (LT option 30 VA)

KCO-R:24 VAC @ 5 VAC ±20% or 24 VDC @80 mA

LT models (A&R):40 VA

Signal Output (KCO-A):4-20 mA @ 500Ω

Accuracy: ±5% or 5% of reading whichever is greater

Measurement Range:

KCO-A:0-100/200/400 ppm, jumper selectable

KCO-R:0-250 ppm

Sensor Technology:

A:Solid-state metal oxide semiconductor

R:Electrochemical

Sensor Life Expectancy:10 years

Visual Indication:

 :Status Green

 :Fault Red

Warm Up Time:1 minute

Response Time:<35 sec

Time Delay (KCO-A):10 minutes

Relay Output (KCO-R):(2) SPDT 120 VAC, 2A resistive, 30 VDC 2A

Alarm Setpoints (KCO-R):Warning 50 ppm, alarm 100 ppm (reset 5-10 ppm change)

Operating Humidity:5% to 95% noncondensing

Operating Temperature:-13° to 122°F (-25° to 50°C)

Low temp (LT): -20℉ (-29.4℃)

Weight: 2.0 lb (0.9 kg)

Warranty: 1 year